3 ms·
> The varnish is the finishing layer that is on top. That layer is also, fwiw, about 3-5 mils most of the time Are you saying the varnish is that thick, or the
by lostlogin 4y ago
> The varnish is the finishing layer that is on top. That layer is also, fwiw, about 3-5 mils most of the time
Are you saying the varnish is that thick, or the layer the varnish is on is that thick?
Painting on a 3-5mm thick layer of varnish sounds like a lot of coats.
The below link is from someone who makes violins and they make the top 2.7-2.8mm total thickness.
https://www.violincellomaker.com/2021/03/17/how-the-thickness-matters/ https://www.violincellomaker.com/2021/03/17/how-the-thicknes...
Edit: rereading your comment makes me think that you’re saying the total top thickness is usually 3-5mm.
- drifkin 4y ago"mils" often means 1/1000th of an inch
- wildzzz 4y agoFinishes like stain or paint as well as adhesives in the manufacturing industry are often called out in mils or thousandths of an inch. We use something called a thin film test to ensure paint is the correct thickness so that really tight tolerances can be maintained. We also using tiny glass beads of a consistent diameter that are mixed in with certain types of adhesives to create a controlled bondline thickness. We have a part that requires a really tightly controlled thermal interface to a circuit board. The solution is to use a specific amount of epoxy mixed with a specific amount of boron nitride powder and a specific amount of glass beads to have a consistent thermal conductivity for every squirt of the glue.
- lostlogin 4y agoThanks.