4 ms·
Surprised at the statement that very few new computers have serial ports. I guess true for macs, but most PC motherboards still come with a superIO-type thing t
by jeffbee 4y ago
Surprised at the statement that very few new computers have serial ports. I guess true for macs, but most PC motherboards still come with a superIO-type thing that offers 1 or 2 16650A UARTs.
[ 0.362434] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- zauguin 4y agoLooking at my last two (non notebook) motherboards (neither of them being particularly new) one of them has a pin header where a serial port could be attached, the other only has some contacts on the board without even pins. Neither of them had a proper port. So even if they could offer these ports and Linux reports them, they might not be usable without special work.
- jabl 4y agoServer platforms tend to have the serial wired to the BMC and going out over the IPMI serial-over-lan on ethernet. But from the host OS it looks like a regular 16550A.
- jeffbee 4y agoUgh, not even populating the header is a terrible way to save one penny. This one I'm using came with the rear panel bracket and everything.
- deckard1 4y agothey are talking about a D-Sub 9 connector, which I haven't seen on new PCs since the early 2000s. If your motherboard has pins they are probably undocumented. And that's likely the best case scenario.
- StillBored 4y agoNah, on actual x86 PC atx/etc motherboards the ports are frequently fully RS-232 compliant, and on all my desktop boards for the past few years are even still documented. Example: I have native, documented DB9/25 on my latest machine, an asus prime x570-pro https://www.asus.com/us/Motherboards-Components/Motherboards/PRIME/PRIME-X570-PRO/ https://www.asus.com/us/Motherboards-Components/Motherboards... which if you download the manual and search for "COM" you will see that it uses the semi standardized 10 pin motherboard header into which a card edge DB9/DB25 can be plugged into. They are overwhelmingly used by hw/firmware/bringup engineers, so, while your right they are frequently undocumented or unpopulated, like JTAG ports its more unusual not to find them. And, yah on a lot of machines they are just whatever logic level the chip supports for IO 1.8V/etc so its common to just wire the headers to FTDI/etc usb converters rather than level shifters.
- mgerdts 4y agoI recently helped someone set up a dell optiplex 7090 small form factor PC. Much to my surprise it came with a proper serial port. https://www.dell.com/en-us/work/shop/desktops-all-in-one-pcs/optiplex-7090-tower-and-small-form-factor/spd/optiplex-7090-desktop https://www.dell.com/en-us/work/shop/desktops-all-in-one-pcs...
- tyingq 4y agoThey may, but that would be TTL-level and would need a level shifter and a 9-pin connector to do actual RS-232, plus trying to find the pins, maybe enabling the UARTS in the BIOS, etc. Making using a USB-to-serial adapter less work.