3 ms·
Most SSDs have temperature thresholds at 85C or higher. Why do you care if yours maintains 40C?
by jeffbee 5y ago
Most SSDs have temperature thresholds at 85C or higher. Why do you care if yours maintains 40C?
- zozbot234 5y agoThere are reasons to assume that data retention might drop exponentially as temperature increases. So if you care about the data, you'll want to avoid overheating your storage media.
- jeffbee 5y agoPower-off storage temperature is a problem for MLC NAND, but when powered on the NAND cells need to reach a high temperature to operate properly. If you are cooling the flash chips with a heatsink (rather than cooling the controller) you will be forcing the device to dump power into the cells to heat them to a temperature where they work properly. 3D NAND hits its best program time and raw bit error rate at about 70C. Edit: See data table on page 27. Retention is directly proportional to device active temperature, i.e. higher cell temperature during programming leads to higher retention. https://www.jedec.org/sites/default/files/Alvin_Cox%20%5bCompatibility%20Mode%5d_0.pdf#page=27 https://www.jedec.org/sites/default/files/Alvin_Cox%20%5bCom...
- touisteur 5y agoThat might be one of the most counterintuitive durability fact I've heard in a long time. Thanks a lot for sharing.
- kkielhofner 5y agoI noted in another comment I needed eight x4 NVMe across two x16 slots in a very dense chassis. I was pleasantly surprised at the temperatures. The hardware is in a colocation facility and I like to have plenty of buffer with standard operating temperatures in case of a cooling failure, etc. Is maintaining 40C necessary under normal conditions? Nope, but it's definitely a nice to have regardless.