3 ms·
It's been a while since I read the paper, but IIRC, you are wrong about how the process works. First I'll define some terms: Image pixel: pixel in the final i
by aidenn0 15y ago
It's been a while since I read the paper, but IIRC, you are wrong about how the process works. First I'll define some terms:
Image pixel: pixel in the final image
Sensor pixel: actual pixel in the sensor
The microlens array bins several sensor pixels into single image pixels. Depending on the incident angle of the light on the microlens, the light will go to a different sensor pixel. This means you can adjust the aperture, as well as focus in post-processing, since a narrower aperture just means a pixel is illuminated by light from a narrower possible number of incident angles.
If I had a whiteboard, I'd draw you a diagram, but you sound like a knowledgeable photographer so you probably "get it" if not, just look at the ray-diagrams in the depth of field section of a photography book.
- devindotcom 15y agoThat's pretty much how I described it in the 6th paragraph. The aperture is still restricted, I believe (F/4 in the paper, F/2 in the production device), and the exposure is governed by sensitivity and exposure length. But I'm not entirely sure about it.
- aidenn0 15y agoSo is your concern that you can't go past f/2? This: http://www.flickr.com/photos/devindotcom/5076642726/sizes/l/in/photostream/ http://www.flickr.com/photos/devindotcom/5076642726/sizes/l/... Was taken at f/3.2 so there is no reason you couldn't get this shot with a f/2 shot from a plenoptic camera with a 35mm lens and a APS-C sized sensor (you would actually have to use some of their software to increase the depth of field to get that picture). Lytro doesn't give specs on the focal length or sensor size; I think we can assume it's probably closer to a point-and-shoot than an SLR, and everybody already knows it's hard to do shallow depth of field with a point-and-shoot, it's not anything specific to Lytro's camera. The majority of point-and-shoots have a fixed aperture (if you "stop-down" for outdoors shooting they just use an NDF filter). If they come out with an pro-quality exchangable lens large-sensor plenoptic, you ought to be able to do the same sorts of things you can do with a pro-quality non-plenoptic camera, only you'll be able to do it e.g. with moving subjects that you otherwise would not be able to focus on with such a narrow depth of field (and as a sacrifice you would have many fewer pixels).