4 ms·
Some of the entries seem incorrect: "USB 3.2 (USB 3.2 Gen 2x2) and "USB 4" (USB 4 USB4 Gen 2×2) should have the same nominal data rate of 2500MB/s, they're 2 la
by masklinn 5y ago
Some of the entries seem incorrect: "USB 3.2 (USB 3.2 Gen 2x2) and "USB 4" (USB 4 USB4 Gen 2×2) should have the same nominal data rate of 2500MB/s, they're 2 lanes (x2) of 10GB/s. Though they are apparently coded differently electrically, so they're distinct protocols.
The tables would benefit from mentioning the coding (8/10 or 128/132) as IMO it's one of the most confusing bits when you see the effective data rates:
* USB 3.2 Gen 1x2 has a nominal data rate of 10G (2 lanes at 5G) with a raw throughput of 1GB/s (effective data rates topping out around 900MB/s)
* USB 3.2 Gen 2x1 has the same nominal data rate of 10G (1 lane at 10G) but a raw throughput of 1.2GB/s (and effective data rates topping out around 1.1GB/s)
The difference is that Gen 1x uses the "legacy" 8/10 encoding, while Gen 2x uses the newer 128/132 encoding, and thus has a much lower overhead (around 3%, versus 20).
- deleted 5y ago[deleted]
- CamperBob2 5y agoHe goes off the rails earlier than that, by saying that USB 2.0 is "also known as" Hi-speed. HS is only one data rate supported by the USB 2.0 standard; it incorporates both full speed from the earlier standard and low speed, which isn't mentioned at all.
- masklinn 5y agoThat's more of an approximation matching how, frankly, most people think of the specs: yes USB 2.0 supersedes 1.1 entirely, but everyone will think of "full speed" and "low speed" as USB 1 which are BC supported by USB 2.0. That's also why USB 3.1 and 3.2's rebranding of previous versions is so confusing and a pain in the ass to keep straight: USB 3.2 1x1 is USB 3.1 Gen 1 is USB 3.0 (ignoring the USB 2.0 BC).
- dwaite 5y agoRight, per his chart "Full Speed" should be known as USB 1.1 Full Speed and USB 2.0 Full Speed.
- belter 5y agoAlso should be: 12 Mbps -> 1.43 MiB/s -> 1.5 MB/s 480 Mbps -> 57 MiB/s -> 60 MB/s 5000 Mbps (5 Gbps) -> 596 MiB/s -> 625 MB/s 10000 Mbps (10 Gbps) -> 1192 MiB/s -> 1250 MB/s 20000 Mbps (20 Gbps) -> 2384 MiB/s -> 2500 MB/s 40000 Mbps (40 Gbps) -> 4768 MiB/s -> 5000 MB/s
- adrian_b 5y agoNo, some of your rates are wrong. The so-called 5 Gb/s USB has a data rate of 4 Gb/s. The marketing data rates for Ethernet are true, i.e. 1 Gb/s Ethernet has a 1 Gb/s data rate, but a 1.25 Gb/s encoded bit rate over the cable. The marketing data rates for the first 2 generations of PCIe, for all 3 generations of SATA, and for USB 3.0 a.k.a. "Gen 1" of later standards, are false, being advertised as larger with 25% (because 8 data bits are encoded into 10 bits sent over the wire, which does not matter for the user). All these misleading marketing data rates have been introduced by Intel, who did not follow the rules used in vendor-neutral standards, like Ethernet. So PCIe 1 is 2 Gb/s, PCIe 2 & USB 3.0 are 4 Gb/s and SATA 3 is 4.8 Gb/s. So USB "5 Gbps" => 500 MB/s (not 625 MB/s), and after accounting for protocols like "USB Attached SCSI Protocol", the maximum speed that one can see for an USB SSD on a "5 Gbps" port is between 400 MB/s and 450 MB/s. The same applies for a USB Type C with 2 x 5 Gb/s links. As other posters have already mentioned, USB 3.1 a.k.a. the "Gen 2" of later standards has introduced a more efficient encoding, so its speed is approximately 10 Gb/s. The "10 Gbps" USB is not twice faster than the "5 Gbps" USB, it is 2.5 times faster, and this is important to know.
- jbverschoor 5y agoIs that the same intel that “forgot” to mention that they overclocked a demo cpu and used ndustrial water chiller?
- asciii 5y agoI was curious and went looking for it. That's pretty hilarious oversight! https://www.tomshardware.com/news/intel-28-core-cpu-5ghz,37244.html https://www.tomshardware.com/news/intel-28-core-cpu-5ghz,372...
- fabiensanglard 5y agoThank you for noticing these issues, I have updated the table. I would be happy to improve it and add encoding. I am surprised by some of the summary entries on Wikipedia (https://en.wikipedia.org/wiki/USB4 https://en.wikipedia.org/wiki/USB4). Looks like USB4 "reverted" to 128b/132b. It is accurate?
- lxgr 5y ago128b/132b is the more efficient coding. The closer to 1 the fraction is, the less coding overhead it has, and 128/132 is larger than 8/10.
- fabiensanglard 5y agoActually, I just noticed that 128/132 is the same fraction as 66/64 so both scheme has the same encoding efficiency. So USB-4 did no "revert in terms of efficiency.
- masklinn 5y agoIndeed, according to the wiki page the subtetly is: > USB 3.1 and DisplayPort 2.0 use 128b/132b encoding, which is identical to 64b/66b, but duplicates each of the preamble bits to reduce the risk of undetected errors there. I guess that was found not to matter so they went back to the more normal 64/66 in USB4? I'm really weak on the hardware stuff so I really have no idea.
- Ldorigo 5y agoFyi, last two columns in table 2 are a bit confusing: footnote c says "real life sequential speed", but then the last column title is "real life", so it's unclear what the difference is