3 ms·
Checking that out: You have: 40 MWh You want: tonoil * 3.4393809 / 0.29075 You have: 1 tonoil You want: barreloil * 6.841
by dredmorbius 5y ago
Checking that out:
You have: 40 MWh
You want: tonoil
* 3.4393809
/ 0.29075
You have: 1 tonoil
You want: barreloil
* 6.8419323
/ 0.14615754
You have: 6.84 barrel
You want: liter
* 1087.4731
/ 0.00091956298
So, roughly 1,100 litres of oil per 40 MWh(thermal).
The generator is likely ~30% efficient at converting heat to eletricity, so bump that up to 3,700 litres/hour.
Even allowing for other inefficiencies, 12,000 litre/hr seems high to me. Though as a practical measure it may be correct. It's within a factor of 4 of the actual demand though.
(Calculations using GNU units.)
- RamRodification 5y agoAren't you missing x3.4393809 on those ~1100 litres?
- deleted 5y ago[deleted]
- dredmorbius 5y agoBingo, that's the error, thanks. Corrected: You have: 40 MWh You want: tonoil * 3.4393809 / 0.29075 You have: 3.439 tonoil You want: barreloil * 23.529405 / 0.042500012 You have: 23.529 barrel You want: liter * 3740.8121 / 0.00026732164 You have: 3740/30% You want: Definition: 12466.667 Or a bit above 12,000 litres. Article was correct.
- m55au 5y agoNo need to complicate things with obscure units. You have: 40 MW/30% / (10722.2 W*hr/L) You want: L/hr 40 MW/30% / (10722.2 W*hr/L) = 12435.259 L/hr
- dredmorbius 5y agoGNU Units has builtins for some standard energy equivalent units, specifically "tonoil" and "barreloil". "litreoil" doesn't seem to be included by default (though it can be added via a local configuration file). literoil = 1 barreloil * liter/barrel And the calculation gives me ...10.69 kWh/L The barreloil value is for crude, diesel may have a slightly higher net energy density. But we're good to 3 sig figs. I could have bypassed the tonoil step and calculated thermal energy in barreloil directly though saving another conversion. Otherwise I'd have to remember energy density/L of diesel fuel. I've added the definitions for litre, pound, and kg oil and can now run: $ units --terse '40 MWh/30%' literoil 12470.969 The fun part though, at least for me, is showing how to do conversions with GNU units, and the equivalences which become apparent doing so.
- m55au 5y agoI looked around a bit in "definitions.units" and there are actually energy densities in there for various fuel sources, including diesel. You have: 1 diesel You want: Wh/L 1 diesel = 10103.465 Wh/L Slightly different value than in Wikipedia, but close enough.
- dredmorbius 5y ago*blink* TIL, there are! Thanks. (For the curious, the definitions file is ~7500 lines, there's a lot in there. GNU version. For those on MacOS, the stock BSD units offers far less.)
- FartyMcFarter 5y agoI think that's wrong. One liter of diesel contains about 10 kWh of energy [1], so you need 4000 liters at 100% efficiency to generate 40 MWh. 12k liters per hour for the datacenter sounds about right, after accounting for diesel engine efficiency. [1] https://www.sustainabilityexchange.ac.uk/files/cambridge_regional_college_sus_how_much_energy_do_you_use_pdf.pdf https://www.sustainabilityexchange.ac.uk/files/cambridge_reg...
- dredmorbius 5y agoRamrodification caught my missing tonsoil -> barrels conversion. https://news.ycombinator.com/item?id=31258490 https://news.ycombinator.com/item?id=31258490