3 ms·
It’s a per-unit-area comparison: https://www.betonconsultingeng.com/passive-radiative-cooling-saves-energy/ https://www.betonconsultingeng.com/passive-radiativ
by mensetmanusman 5y ago
It’s a per-unit-area comparison:
https://www.betonconsultingeng.com/passive-radiative-cooling-saves-energy/ https://www.betonconsultingeng.com/passive-radiative-cooling...
“”SkyCool arrays work by cooling a fluid that moves below the panels and is pumped through refrigeration systems. The cooling helps reduce the run time of motors in the refrigeration system to reduce electricity consumption. All told, the SkyCool system can reject heat at about 100 watts per square meter, saving between 450 and 550 kilowatt-hours per square meter every year—twice the average production of a solar panel.—Brooks Johnson, Star Tribune, 12 March 2022“”
- Retric 5y agoOk, that’s your problem it’s about 2400Wh of heat moved per day per m2. A solar panel should be collecting ~1600Wh/day of electricity/m2, but an AC can then use that electricity to remove ~4,800Wh of heat. And that’s assuming you need to remove heat 24/7/365. A solar panel can also provide electricity when cooling is unnecessary. Things get even worse if you need pumps etc to circulate a fluid under the film, which is presumably why that 10-20% cost savings figure was suggested.
- mensetmanusman 5y agoDon’t necessarily need pumps, depending on what you are trying to do: https://www.abc15.com/weather/impact-earth/asu-testing-new-material-to-make-tempe-bus-stops-cooler?_amp=true https://www.abc15.com/weather/impact-earth/asu-testing-new-m... This is what I was thinking of in the case of India :) Edit: wanted to add, application of this technology might require government level systems thinking. With an air conditioner, that heat being moved is being pushed to your neighbor, passive cooling technology rejects much of the heat out of the earth. I.e., AC contributes to the urban heat island effect, the situation snowballs and makes everyone’s AC have to run even harder. Passive cooling films are a mitigation for the urban heat island effect.
- Retric 5y agoUHI is mostly due to the materials cities are made of and lack of evaporation from plant life which is why it was noticed 200 years ago. AC has such a small effect it would be hard to measure.
- mensetmanusman 5y agoPeople are studying the effect. Passive cooling films get at the ‘materials cities are made of’ problem, by decreasing the city-wide absorptivity of heat energy. “We found that waste heat from air conditioning systems was maximum during the day but the mean effect was negligible near the surface. However, during the night, heat emitted from air conditioning systems increased the mean air temperature by more than 1 degree Celsius (almost 2 degrees Fahrenheit) for some urban locations,” https://news.asu.edu/content/excess-heat-air-conditioners-causes-higher-nighttime-temperatures https://news.asu.edu/content/excess-heat-air-conditioners-ca... “By the end of the century, greenhouse gas emissions from air conditioning will account for as much as a 0.5-degree Celsius rise in global temperatures, according to calculations by the World Economic Forum.” https://www.scientificamerican.com/article/how-to-prevent-air-conditioners-from-heating-the-planet/ https://www.scientificamerican.com/article/how-to-prevent-ai...
- deleted 5y ago[deleted]
- Retric 5y agoFirst props that’s a peer reviewed paper so this may just be hot air on my part. Anyway, their using the most extreme data that they can find to base their calculations which is rather suspect. They regularly mention 65% of electricity useable for AC, but that’s peak during a heatwave not the general average etc. Still, a peak of 0.5-1C at night and ~0C in the daytime is a much larger effect than I was expecting especially when nighttime energy usage for AC is only averaging around 1W/M2 in their data.
- ncmncm 5y ago
- ncmncm 5y agoIt is always a mistake to engage with this Retric. He just posts random remarks which do not stand up to a moment's scrutiny, but hopes they will seem plausible enough to derail meaningful discussion. We have a word for that.