3 ms·
Many years ago, only the wavelength of a laser could be measured and the frequency was indeed computed using the speed of light. Nevertheless, there is almost
by adrian_b 5y ago
Many years ago, only the wavelength of a laser could be measured and the frequency was indeed computed using the speed of light.
Nevertheless, there is almost a half of century since it began to be possible to measure directly the frequency of lasers.
Nowadays, the frequency of the lasers is what is known, by measurement, and their wavelength is computed using the speed of light.
Before the speed of light became a conventional constant, there was a wavelength that determined the unit of length and a frequency that determined the unit of time.
At that time, measuring the speed of light was done by measuring both the wavelength and the frequency of a laser, as ratios to the standard of wavelength and to the standard of frequency.
Now, when the speed of light is a conventional constant, what the experiment described by you did, is measuring the length of a ruler using a laser of known frequency, and verifying that the measured length is the same as the length marked on the ruler.
The measurement of the frequency of lasers is done using a special kind of laser, which produces pulses of light, not continuous light, and which can be tuned so that there is a precise ratio between the frequency of the light and the repetition frequency of the pulses. (This kind of lasers are called by the not very explicit name "optical frequency combs")
The repetition frequency of the pulses is in the MHz to GHz range, so it can be compared with the frequency of other oscillators using electronic counters.
The frequency of the light can be compared with the frequency of other light sources using various optical interference methods (taking advantage of the fact that periodic pulses of light have a specter with a very large number of equidistant spectral lines, some of which will be close in frequency to the frequency that must be measured). So in the end, the ratio between the frequency of any low-frequency oscillator and the frequency of any light source can be determined.