12 ms·
Are you sure about that? From what I could find reactors are in the 500-1000°C [1][2] while coal turbines are in the 540-600°C range [3]. This is about the smal
by vlovich123 5y ago
Are you sure about that? From what I could find reactors are in the 500-1000°C [1][2] while coal turbines are in the 540-600°C range [3]. This is about the small modular reactors which I think are HTGR and run a bit hotter AFAICT (i.e. closer to 1000°C). Seems pretty close regardless.
Do you have anything I can read up about regarding nuclear reactors having cooler temperatures than what coal fire generates?
[1] https://www.iaea.org/sites/default/files/publications/magazines/bulletin/bull26-4/26404781821.pdf https://www.iaea.org/sites/default/files/publications/magazi...
[2] https://www.sciencedirect.com/science/article/pii/S1738573315300267 https://www.sciencedirect.com/science/article/pii/S173857331...
[3] https://www.sciencedirect.com/topics/engineering/coal-fired-thermal-power-plant https://www.sciencedirect.com/topics/engineering/coal-fired-...
- acidburnNSA 5y agoYes they're right about it. Your first link says that water-cooled reactors can produce steam up to about 300 °C, which is accurate. The hottest outlet temperature today from a nuclear reactor is about 1000 °C from HTTR in Japan, but that's fairly exotic. There have been hotter outlets back in the NERVA nuclear rocket days. Also exotic. Good read is this one: https://www.iaea.org/publications/8692/advances-in-nuclear-power-process-heat-applications https://www.iaea.org/publications/8692/advances-in-nuclear-p...
- perihelions 5y ago- "There have been hotter outlets back in the NERVA nuclear rocket days. Also exotic." Though, those were rocket engines with a design lifespan of several minutes. It's not possible to sustain temperatures like that, is it? (I am not an engineer). I remember reading that one of the NTR test firings saw bits of molten corium flying out in the exhaust plume.
- rich_sasha 5y agoJet engines get way hotter for sustained periods of time: https://aviation.stackexchange.com/questions/74362/how-hot-do-internal-parts-of-jet-engine-get https://aviation.stackexchange.com/questions/74362/how-hot-d... (And the crazy thing is, if you think about it, they are also gas turbines! The bough I guess perhaps your question was more specific to the reactor itself)
- perihelions 5y agoAm I misreading your link? I see temperatures listed "only" up to 2,000 K; but the successful NTR tests went up over 2,500 K. (Excluding the failed ones that melted, of course). - "The average exit gas temperature was 2,550 K (2,280 °C), the highest ever recorded by Project Rover. The chamber temperature was 2,750 K (2,480 °C), another record." https://en.wikipedia.org/wiki/Project_Rover https://en.wikipedia.org/wiki/Project_Rover There's also one notable difference: internal combustion turbines see their highest temperatures in the gas phase, which is somewhat insulated from the turbine blades (by weird fluid dynamic effects I don't understand). No solid material needs to withstand the peak temperature. https://en.wikipedia.org/wiki/Turbine_blade#Film_cooling https://en.wikipedia.org/wiki/Turbine_blade#Film_cooling
- rich_sasha 5y agoI was focusing on turbine elements with temperatures well in excess of 1000 deg C, which is much higher than the temperatures described above. Indeed, exhaust gases are even hotter. I believe turbine elements are cooled by grouch internal channels these days, which is quite mind blowing.
- VintageCool 5y ago300° C. Nuclear reactors are pretty cold, for thermal generation. As I understand it, this is because the cooling system has to remain liquid, and you can only pressurize+heat water so much before it turns to steam (or becomes prohibitively expensive to contain).
- makomk 5y agoYup. Most of the UK's reactors are an unusual gas-cooled design which does produce steam temperatures similar to coal power plants, but that's pretty much unique to the UK and also a technological dead end - there were apparently enough engineering headaches that they didn't end up a clear win over standard pressurised water reactors and no-one's built any based on that design since.