4 ms·
You can reach somewhat higher accelerations by making the center of the rotor thicker than the periphery, but you start getting into ridiculous ratios pretty qu
by kragen 5y ago
You can reach somewhat higher accelerations by making the center of the rotor thicker than the periphery, but you start getting into ridiculous ratios pretty quickly.
I don't think Quicklaunch would have to suffer significant barrel damage, maybe some fouling that can be cleaned off. The pressures and temperatures required are pretty low, and the required chemistries are pretty tame; it's just the velocities that are high.
- Retric 5y agoThe g forces are from rotation not how fast you spin up. To take it to the extreme an arm that’s slightly longer than the radius of the earth for sometime moving at Mach 22ish hits ~1g, because that’s orbit. Hitting Mach 22 or even Mach 10 on an arm that’s 500m means vastly higher g-forces.
- jhgb 5y agoAnd how long is the arm supposed to be in the intended orbital system? Because if you want a 500m arm, you literally have a millions-of-cubic-meters-sized vacuum chamber -- and not only that, you have a vacuum chamber with a highly disadvantageous shape (a flat disc). That sounds like a mildly insane design to me.
- Retric 5y ago50m sorry 500 was a typo. “This test accelerator is 108 ft (33 m) in diameter, which makes it a one-third scale of the operational system that is being designed.”
- kragen 5y agoYes obviously.