3 ms·
I don't really agree with your classification of serial v parallel. With a parallel port line, if you trim any line, the entire port is dead. What we now do i
by cogman10 5y ago
I don't really agree with your classification of serial v parallel.
With a parallel port line, if you trim any line, the entire port is dead. What we now do is multiple serial lines sending data in parallel, but still in a serial fashion (IE, encoding data rate and clock information per line). If you cut a serial line, data still flows. (even with something like PCI-Express).
The key distinction is a parallel bus has effectively a single clock for the arrival of data whereas serial lines are allowed to have data flow at different rates per line.
Serial lines require more hardware at either end to work effectively but ultimately don't have the timing and cable length issues that plague parallel bus transmissions.
Though, I admit this is probably the same as quibbling over using threads vs forking for concurrency.
- StillBored 5y agoI figured someone would say this (each bit clocked in parallel), but there are a lot of other things one can use in an attempt to quantify whether something is "serial or parallel" and I don't think at the highest level any of them count more than whether or not your physically sending multiple bits in parallel down multiple wires. Oh, and BTW, you can cut data lines on any number of "parallel" buses like DDR and they can frequently continue to work because there are extra ECC/parity lines which can recover the original data, or they are packetized and can recover/detect errors. Particularly on die/board level clocked interconnect buses which don't have as much complexity as the longer distance, outside the chassis interconnects. OTOH, a single serial line is done if it gets cut. You can only fix that by... ganging them in parallel. (edit: I keep tweaking this, but clock recovery isn't a hallmark of serial lines either, as there are plenty of things traditionally considered serial that have separate clock lines and have the same problems that happen on what one might consider a traditional parallel bus when run at high enough frequency)