8 ms·
Medusa is a device that allows connecting of old computers to modern displays
- ksaj 5y agoIt is strange that there are no pictures of this device. However, with the (brilliant) name, I can easily guess what it looks like. There have always been adapters and multi-adapters because of hand-held video recorders, various entertainment units, and even overhead displays. Even HDMI comes in Standard, Dual, Mini, Micro and a specialized Automotive connectors.
- iamevn 5y agoLooks like there's some more info here: https://lotharek.pl/productdetail.php?id=135 https://lotharek.pl/productdetail.php?id=135
- Animats 5y agoThere's a video, but it's half an hour of calibrating a pick and place machine.[1] [1] https://youtu.be/IAsJbZpvYHU https://youtu.be/IAsJbZpvYHU
- vinayan3 5y agoThe price point is pretty step at $169.
- dharmab 5y agoThat's not unusually expensive for this type of hardware. My RetroTINK 2X was around 130
- ksaj 5y agoI thought that at first. But if you need to translate between a lot of the devices this would work with, you might spend more than that on all the different adapters. For someone with a lot of retro gear mixed in with new gear (like me), it's probably not such a bad price. Especially businesses that digitize home videos etc. I wonder if there is surge control on the inputs. The number one reason I have to replace video adapters is the input buffer frying. Ironically that often results in a not-blue screen of death.
- sbierwagen 5y agoWelcome to small-production-run hobbyist electronics. The stuff you see at Walmart is cheap because they make 50,000 at a time.
- kmeisthax 5y agoAlso, the cheap options are using off-the-shelf upscaler chips that will choke on anything other than NTSC or PAL video baseband - the kind of chips that go into TVs that have retro inputs. As far as I'm aware there is no chip on the market that you can buy that will handle arbitrary analog video modes to the fidelity that we want them, and pretty much everyone is using some amount of FPGAs to handle some part of the conversion[0]. That's like half the BOM cost on these things alone. [0] Don't ask me how much. I imagine you probably couldn't directly sample analog video on an FPGA.
- GekkePrutser 5y agoFor home computers like c64 and amiga that'll be enough though. They were TV based. I didn't realise this was that expensive. Probably will go for a Chinese option then as they're only 20 bucks.
- rasz 5y agohttps://github.com/hoglet67/RGBtoHDMI/wiki https://github.com/hoglet67/RGBtoHDMI/wiki $5-10 pi + $3 cpld + some comparators and a DAC for the analog addon https://github.com/hoglet67/RGBtoHDMI/wiki/Bill-of-Materials-(Analog-Board) https://github.com/hoglet67/RGBtoHDMI/wiki/Bill-of-Materials...
- quattrofan 5y ago
- madengr 5y agoNo it’s not. You are just accustomed to Chinese garbage electronics.
- tomcam 5y agoWhat would be the best price, and how would you get it there?
- nomel 5y agoIf there are no alternatives that exist, it seems very reasonable. You'll spend much more time/$ on hacking it together yourself with an FPGA.
- jhgb 5y ago> It is strange that there are no pictures of this device. You'd be petrified to see it.
- kurthr 5y agoMan, it doesn't even cover CGA displays (200x160,16 color)!
- mkl 5y agoCGA 16 colour was only 160×100 (it was 80×100* text mode pretending to be graphics [1]). Much more commonly used was 320×200 4 colour. * Font height changed to 2 pixels, so 100 lines of "text" instead of 25 (640×200 actual pixels). [1] https://www.cs.mcgill.ca/~rwest/wikispeedia/wpcd/wp/c/Color_Graphics_Adapter.htm https://www.cs.mcgill.ca/~rwest/wikispeedia/wpcd/wp/c/Color_...
- ytjohn 5y agoThat was the first thing I looked for as well. I have a service monitor (combination tracking generator and spectrum analyzer) witch CGA output. There's a fair amount of old engineering equipment with CGA out. They typically have green CRT built in, but if you do hook up an external monitor you get a rather nice color display. Not a total loss, CGA was also also popular in cabinet arcade games. You can get converter boards. All the ones I've seen had 5-pin headers and you have to build your own cable.
- snvzz 5y agoThe main thing is that I can't find the license. I have to assume it's a proprietary solution. It seems like an attempt to snip the OSSC Pro, an open source hardware (OSHW) solution which is set to release soon.
- engineer_22 5y agoI came to here request a picture also
- GekkePrutser 5y agoYeah or a link to buy it.
- browncalms 5y ago[flagged]
- a_t48 5y agoTrying to figure out how this is different from an OSSC - I guess it gives you composite/svideo - the big question in my mind is if it's easier to configure. The OSSC is powerful, but there's a lot of fiddling around with the raw primitives defining the input and output signals (which can be a good thing, if you're into that).
- snvzz 5y agoFiddling is generally only needed if you want pixel perfect output. Else you get OK results, which are the same OK results you'd get with a less flexible solution. Fortunately, most of the figuring out for perfect timings has already been done by other people. I was able to just input someone's numbers for my A1200. The results look positively digital, as if there was no analog step whatsoever in the chain.
- a_t48 5y agoI wanted pixel perfect output. It turns out this is a very hard problem for SNES, probably due to the 256×224 resolution not dividing nicely with anything. I ended up with a "pretty good" output, then a few months later more SuperNTs went on sale, so I got one of those. :) Some of the difficulty could have also been sensitivity with my monitor or capture card.
- snvzz 5y agohttps://www.junkerhq.net/xrgb/index.php?title=Super_NES https://www.junkerhq.net/xrgb/index.php?title=Super_NES There's a special sampling mode apparently.
- throwaway81523 5y agoThis is nice, but how about a way to connect modern computers to old displays? I have several really nice displays (mostly in old laptops, but also an SGI 1600SW) that it would be great to have a DVI or similar input for in one way or another.
- thorncorona 5y agoYour laptop monitors probably use lvds/edp to interface with the motherboard. You can buy a converter to displayport for those. For your old monitors that use non-standard interfaces you should just buy a new one. Acquiring a converter will be expensive and time-consuming. You might as well just buy a new Dell ultrasharp, which is guaranteed to be much nicer.
- throwaway81523 5y agoThe idea is to avoid a big chunk of e-waste from disposing of a perfectly good monitor. Of course the converter introduces electronics of its own, but it's a much smaller thing than a new Dell Ultrasharp, and hopefully much less expensive as well. lvds to displayport converter is interesting and I should look into it. Thanks for mentioning.
- LeFantome 5y agoI love old monitors but, like old fridges, it is probably better for the environment to scrap them than to preserve them. Modern displays are ridiculously more power efficient.
- ComputerGuru 5y ago“Modern” displays are some combination of 16:9 at best (and even that is being supplanted by even more ridiculous aspect ratios), use fake 10-bit color mode, have terrible color gamut, bad viewing angles, horribly glossy, or some other incredible limitation. There is literally no “modern” equivalent for my barely ten year old ZR24W/ZR30W. It heats up my office in ways a new UltraSharp doesn’t, but that Dell wastes its retina pixels on real estate I can’t use. I say all this as someone that actually welcomes a hi-dpi, hi-fps, low-power, etc version of the hardware I’ve got.
- olsonjeffery 5y agoI bought an Apple ][e recently at an estate sale. Loved playing with it and worked fine at the sale, but failed (monitor is fine but main board no longer turns on, no hard drive grind on startup, etc) after ~15 minutes of use. I found some troubleshooting manuals and got, then replaced, a bunch of main board chips. Still no luck, so I replaced the PS. So I’m giving up my sunk costs on getting this actual Apple ][e into working shape, but I’ve decided to settle for hollowing it out as a sort of classic computer arcade cabinet? (with the help of a apple-keyboard-connector-to-USB dongle I found online), putting in a rpi4, and perhaps running an emulator to start (since I’ll be specifically reharnessing the original keyboard). This means I’ll trash the main board (and perhaps disk drive enclosure, which I have no use for) and also need to find a flatscreen to very safely and carefully put into the A2M2010 monitor enclosure after removing the CRT component (lovely green phosphors, sad I won’t get to see more of it). Anyways, all of this is to say that this device is lovely and I might get when if another piece of classic hardware falls into my possession. :)
- andrewstuart 5y agoDon't trash it - many vintage computers need simple repairs before they'll work. Spend a few hundred dollars and find someone to recap it and get it going for you again. An old Apple 2 is a classic machine - it shouldn't be trashed. At worst sell it on to a collector for parts.
- jacquesm 5y agoIf you're in Europe I'd be happy to repair it for you, using it as an enclosure is a real waste.
- bingaling 5y agodon't trash it, put it in a closet for a while until you want to (or find someone who wants to) learn electronics troubleshooting. You'll regret trashing it in a few years.
- vitaflo 5y agoDitch the RPi4 emu idea and get a Mister FPGA. It’s wonderful for retro computers as well and arcade and console games.
- foodstances 5y agoSee also the RGBtoHDMI: https://github.com/hoglet67/RGBtoHDMI/wiki https://github.com/hoglet67/RGBtoHDMI/wiki
- Splognosticus 5y agoI have one of these and highly recommend it. Do note it is expressly for converting older digital signals to HDMI though. MDA and CGA are really difficult to find displays for these days, since even old CRT monitors have trouble with vsyncs lower than what VGA uses. And of those, the ones still in working order are exceptionally rare.
- rbanffy 5y agoLotharek does some really awesome stuff. It'd be really cool if a device like this tried to simulate the CRTs that would be connected (blur, diffusion, persistence, composite color artifacts, etc) to the vintage equipment. With that, it'd be perfect to restore old equipment where the irreplaceable CRT needs to be replaced.
- tux1968 5y agoI don't know how it compares, but many of the retro computer channels on Youtube (Such as Adrians Digital Basement) use and speak highly of the RetroTink 2X($130) or 5X($300) pro: https://www.retrotink.com/product-page/5x-pro https://www.retrotink.com/product-page/5x-pro Which can handle: Composite (shared with green RCA jack), S-Video, Component, RGB and Composite on SCART connector, inputs.
- rsync 5y agoI recommend the retrotink devices - specifically the 2x PRO and 2x SCART which are very simple, very tightly focused devices. I have an RGB modded SNES connected with 21-pin to (modern HDMI) and it looks amazing. If you have more exacting requirements or want a lot of configuration flexibility the OSSC may be a better choice but if you know exactly what your input/output is and it is supported, get the simple retrotink device.
- aidenn0 5y agoI have a RetroTink 2X and it's amazing for the price. In addition to the physical connectors you mention it can handle certain cases that are hard: 1. can switch between 240p and 480i 2. Can switch between notch and 3D comb filter Certain "not quite valid" outputs will not work with a 3D comb filter, but will work just fine with a notch filter. The only downside is that sound from some devices (most notably the Sega Genesis, but possibly others) doesn't work over HDMI; as long as whatever you are putting your sound through has an analog input that's a non-issue though.
- vintermann 5y agoI can attest that the Retrotink 2X mini works OK for connecting a Commodore 64 to a modern (HDMI) display. Though, there are some oddities... ideally, I'd like to just use it for the video signal, and let the audio go straight to speakers, but the video often gets messed up when I do that. The audio signal also becomes unusually strong. (Going through HDMI I can at least dampen it somewhat, although it seems to lose a good deal of bass) Probably some subtlety about voltages that I don't get about these ancient electronics.
- Epiphany21 5y agoThis is a pretty cool idea. Right now I have a small collection of mostly period-accurate monitors for my retro boxes and I prefer them for nostalgic and aesthetic reasons, but I'm under no illusion these will last indefinitely and CRTs can be difficult and a bit dangerous to repair. Eventually I'll want something like the Medusa adapter.
- hyperdimension 5y agoFor what it's worth, I highly recommend Randy Fromm's four-part class on CRT repair on YouTube: I watched it just out of curiosity, and now I can at least claim to know another useless skill now.
- nickt 5y agoThat whole channel is a goldmine of old school electronics repair. Thanks for sharing. https://youtube.com/user/randyfromm https://youtube.com/user/randyfromm
- Sophistifunk 5y agoNo comments on this Medusa as I've never heard of it before, but for this task I've been using an OSSC, which definitely works well where I've tested it (mostly for my Megadrive) https://www.retrorgb.com/ossc.html https://www.retrorgb.com/ossc.html
- Gigachad 5y agoNeed something like this to connect current gen HDMI devices to Apples thunderbolt only usb c monitors. Ended up returning the pro display xdr when I found out it was practically impossible to plug in hdmi devices.
- aidenn0 5y agoThere are HDMI to display port adapters and displayport to thunderbolt (the latter as a PCIe card). No clue if chaining them together works, but I've seen each work separately.
- Gigachad 5y agoHDMI to displayport is already an active adapter which is complex and expensive. Stacking two active adapters together would be unreasonably expensive and I'd expect some noticeable latency.
- aidenn0 5y agoSince the dot clocks are identical, it's feasible to implement with an amount of latency measured in lines, not frames; in fact I'd be surprised if there even was a frame buffer involved.
- deleted 5y ago[deleted]
- hinkley 5y agoI had this notion when HDMI was coming out that soon we might have the display of one device windowed into a larger display, like Picture in Picture but arbitrary. Might have been some ideas stuck in my subconscious from the likes of Total Recall, but it seemed like we would be hitting a point where we stopped wanting to upgrade all of our devices every time we got a bigger TV with more resolution. We still see situations where we have monitors that we can't drive at full resolution and frequency from a single cable. So why not window in a 4k 60-120Hz feed and fill in the 'background' with a low frequency display (eg, a wallpaper and an information radiator), say 10k at 24Hz.
- kevin_thibedeau 5y agoThere are commercial products that do this for things like video walls.
- mikerg87 5y agoSounds like Anchor Bay's DVDO iScan VP50 Video Processor from the old times: https://atlona.com/pdf/DVDO_iScan_VP50_PRO.pdf https://atlona.com/pdf/DVDO_iScan_VP50_PRO.pdf
- zdw 5y agoAnother option that does analog -> analog conversion/upscaling/frame doubling: https://github.com/ramapcsx2/gbs-control https://github.com/ramapcsx2/gbs-control Much less expensive than the OSSC or Retrotink products.
- dqh 5y agoI wonder how it will treat the (a bit over 50Hz) PAL and (a bit under 60Hz) NTSC Commodore 64 s-video signals - will it generate a DVI signal at these rates, or adjust the frame timing by either tearing or skipping/duplicating as necessary.
- CTDOCodebases 5y agoDoes this thing actually exist? There is no mention of recently released or upcoming alternatives that solve the same problem.
- Someone 5y agoSo, how much of this is hardware, and how much software? What’s the minimal hardware you would need, and how powerful a CPU would you need with it? Is this thing close?
- mnw21cam 5y agoThere's no mention of accepting interlaced video inputs. Does it?
- justin66 5y agoIt doesn't even support 13w3, so "old computers" doesn't include a lot of Unix workstations.
- bullen 5y agoThe best way to connect old composite/s-video devices to a modern screen is through the GV-USB2 japaneese capture dongle. Very low latency so perfect for gaming. Resolution is too low for anything else really. Unfortunately it only has official windows drivers that work (I found open-source linux ones, but havent tried them yet).