5 ms·
There's a multi-part answer. Legally (the subject that requires FAA approval) is that the type-certificate (the legal basis for certification and authority to
by sokoloff 5y ago
There's a multi-part answer.
Legally (the subject that requires FAA approval) is that the type-certificate (the legal basis for certification and authority to operate) for these engines specifies the use of 100LL and the standard for 100LL is a composition-based standard, not a performance-based standard. If it doesn't have the prescribed amount of TEL, it's definitionally not 100LL, even if it would meet the performance requirement of the engine.
Then, from an engineering standpoint (the subject that companies are working on in order to propose fuels to the FAA via PAFI or GAMI seeking multi-model Supplemental Type Certificate), aircraft engines are stone-age in complexity and are overwhelmingly air-cooled, fixed timing [except during starting], and operate for hours on end at 75%+ of rated power. Your auto is water-cooled, has variable timing, and typically runs at 8-15% of rated power. An aircraft engine has to run reliably with cylinder head temperatures of 460ºF or more (your car's cylinders are much more tightly controlled as a result of the water cooling).
Why can't airplanes use a different engine? Airplanes are (legally) certified to use a specific engine and have had extensive flight testing to determine takeoff/landing distances, fuel consumption figures, etc. Those engines are (legally) certified to use a specific fuel [or list of fuels]. Automobile engines have a horrible track record when attempted to be converted to aviation usage. Small, normally aspirated engines are able to run on low-octane, ethanol-free pump gas. The aircraft with high-powered turbo-charged engines represent around 25% of the engines. Because of their higher utilization, those engines burn around 75% of the avgas purchased in a year. (These are the CapeAir fleet, skydive operators, etc.)
- stoltzmann 5y ago>The aircraft with high-powered turbo-charged engines represent around 25% of the engines. Because of their higher utilization, those engines burn around 75% of the avgas purchased in a year. Wouldn't turbo-charged engines burn jet A-1 rather than avgas?
- cjrp 5y agoTurbine engines would, but that's different from turbo-charged (piston) engines.
- stoltzmann 5y agoThat'd make sense - I'm just wondering how many of those would be in use today. From my limited experience with skydiving operators, I've seen only smaller dropzones run piston planes that take avgas (i.e. C182), or turboprops at larger operations (like a C208). Running a larger plane on avgas would be prohibitively expensive, lead to higher jump ticket prices and in return cause less people to jump there.
- cjrp 5y agoAh sorry, I didn't see the part about using them as jump planes. Not sure about that, the ones I've seen are usually turbines. Plenty of twin-pistons used for transport though.
- sokoloff 5y agoI should have said "high-compression or turbo-charged". The C182 after serial number 65176 uses the O470-U high-compression (8.6:1) engine which does not have an auto-fuel certification. C182s prior to that number use the less efficient, lower compression (7.0:1) O470-R engine, which can run physically unmodified on ethanol-free auto fuel. (Note that what aviation considers high-compression is laughably low-compression in modern automobiles.)
- stoltzmann 5y agoThat makes sense, thanks for the explanation. It didn't sound right to me that there would be so many turbo-charged piston aircraft, but if we add the high-compression engines then the fuel usage would definitely follow the Pareto principle.
- jabl 5y agoIIRC all else being equal, larger cylinders tend to need lower compression. I don't remember why, maybe larger random fluctuations in air-fuel mixture making knocking statistically more likely with bigger cylinders? (For airplanes vs. car engines, probably other effects are more significant, like higher head temps, poorer mixture due to carburetors, fixed ignition and whatnot.)
- ryandrake 5y agoThe engineering reasons and legal reasons reinforce each other in an endless cycle. Engines are of stone-age complexity because the FAA says they must be, and the FAA says they must be because safety, and the stone-age engines are safe because nobody takes risks and they remain in the stone-age. We're talking about an industry where you can tell which piston airplanes are new because they are fuel injected instead of carbureted!! This is one of the reasons why I think almost all of the innovation in GA, including modern powerplants, electronic ignitions, advanced avionics electronic systems, and even safety systems, is happening in the Experimental category, not in certified factory-built airplanes. If I owned a Cessna and decided to so much as run a USB charger out to the panel, the FAA would come down on me like a ton of bricks. But I could replace the engine monitor or autopilot on my E/AB category airplane, and the FAA doesn't even care. Hell, I could replace the entire engine with something I invented in my basement, and all I have to do is re-do Phase I testing.
- sokoloff 5y agoI agree with you in effect, but disagree in terms of mechanism. The FAA doesn’t say you have to use any particular tech; instead they say the burden of proof is on the applicant for an STC to prove an equivalent level of safety and no degradation in performance that would be relevant to certification of the original article. If you want to add a turbo-normalizer to an engine originally certified as normally aspirated, there’s a process to get that approved. Replace one magneto with electronic ignition? There’s at least one group with an STC for that. (BTW, your USB charger example is a minor modification, able to signed off by an A&P.)
- Stratoscope 5y agoFor those unfamiliar with the terminology, A&P stands for airframe and power plant. An A&P mechanic is someone licensed to work on the airframe and engine.
- coryrc 5y agoWhy doesn't our safety matter?
- 5y ago