2 ms·
Yes. The easiest to see the speeds is with "lsusb -t", which will list all ports and connected devices, with their speeds and the kernel drivers that are used
by adrian_b 5y ago
Yes.
The easiest to see the speeds is with "lsusb -t", which will list all ports and connected devices, with their speeds and the kernel drivers that are used by them.
For USB 2.0 high speed you will see "480M", for standard speed you will see "12M" and for low speed (e.g. keyboards and mice) you will see "1.5M".
For USB 3, you will see "5000M" (USB 3.2 Gen 1x1) or "10000M" (USB 3.2 Gen 1x2 on Type C connector).
Besides checking the speed, for some devices it is useful to check the kernel driver that is used, to verify if their full performance is reached.
For example, in the case of an external SSD or USB memory stick which claims to support UAS (USB-attached SCSI), "lsusb -t" should display "Driver=uas". If it displays "Driver=storage", that means that due to some quirk the device capabilities have not been recognized and the kernel uses the much slower Bulk-Only transport protocol, instead of UAS.