4 ms·

> Ethernet, and 802.11 full duplex ethernet circuits (eg: a basic cheap 10Gbps 1310/LR carried over two $30 transceivers and a six foot fiber patch cable betwe

> Ethernet, and 802.11 full duplex ethernet circuits (eg: a basic cheap 10Gbps 1310/LR carried over two $30 transceivers and a six foot fiber patch cable between two pieces of equipment) and a half-duplex TDD/CSMA regime like 802.11b/g/n/ac/ax are not the same thing. yes they both enable ethernet connectivity between devices on fabrics of things that can see and arp each other. the ethernet 10GbE might be shared by many individuals. but it's full speed both directions. one is half duplex, the other is not. one has contention on the shared media airtime, the other does not. they are both possibly shared in the sense that many peoples' traffic may be carried across the 10GbE full duplex circuit, the the real world implementation is very different. the real world implementations of FDD point to point (FCC part 101) or similar radio systems are closer to wired ethernet in concept, though with less capacity. however I do agree with your general point that more people should familiarize themselves with the limitations and usage methodologies for half duplex IP data mediums and the best real world implementations.

dragontamer 5y ago
You're right for sure. I probably should have clarified that when I said "Ethernet", I meant classic 10 Mbps Ethernet that today's kids probably don't know about. The Ethernet hub acted like a bus: anything one connection said was broadcast to _ALL_ other connections. Of course, today we have far faster point-to-point switches. But it helps to remember that the Ethernet-protocol was built in the days of old: half-duplex shared communication broadcast to everyone on your hub. ------- Today's wired 1Gbps or 10Gbps ethernet are way way faster than half-duplex channels that 802.11 / Wireless technologies are forced to use (after all: the physics behind 802.11 and walkie talkies remains fundamentally the same) There probably isn't a need for CSMA/CD systems in Ethernet anymore (since today's networks are all dedicated wires). But still, the CSMA/CD system exists for a reason, a legacy of the old "shared ether network communications" that gives rise to the name "Ethernet". (One Ether that everyone on the network can hear simultaneously, like a walkie talkie)
- jfoutz 5y ago
  Raises hand. I remember discovering promiscuous mode, and a stern talking to from our network engineers. It was obvious I didn't know what the hell I was doing, so I got a great tutorial about the differences between hubs and switches.
- noduerme 5y ago
  Ahah. As opposed to token ring.
- p_l 5y ago
  I'd argue that the legacy of CSMA/CD still alive in ethernet is what makes it harder to implement efficient networks, as the switched network kinda tries to emulate the shared bus behaviour.
  - dragontamer 5y ago
    I admit that I'm not actually a network engineer at this point. I took a networking course back in college and what I've discussed so far is largely just the basics and how I've internalized my lessons from back then. Looking at CSMA/CD more specifically, as well as "full-duplex Ethernet" (which are 100Mbit, 1Gbit, and 10Gbit modern Ethernet), it seems like CSMA/CD is no longer used in any full-duplex Ethernet Protocol. I'm not 100% sure about that, since its outside the scope of my old studies. But it makes sense to me. It seems like "full duplex Ethernet" can only work with point-to-point communications. If you have point-to-point connections between exactly two stations, there's no need for carrier-sense (CS), multiple-access (MA), or collision-detection (CD) protocols at all. CS: Wait for the current person on the walkie-talkie to say "over" before you yourself start talking. MA: Walkie talkies: many people can access the same channel. CD: If two people accidentally start talking at exactly the same time, they need to independently try to restart-talking. A random-number generator with exponential backoff is common for this sort of thing IIRC, though I'm not keen on the exact details.
    - p_l 5y ago
      The problem is that the switched network has to emulate behaviours that were free on CSMA/CD system. So we get MAC learning, Spanning-Tree Protocol, and ultimately if you want performant large scale ethernet switching (and not just terminate ethernet at point2point) you end up with complex software directly managing forwarding tables (all sorts of SDNs) or essentially turn ethernet into routed network (using IS-IS routing, two standards exists for implementing it, one of them - TRILL - is reportedly backbone of Cisco Nexus Fabric system). There's a reason why another name of Layer 2 ethernet network is "broadcast area".
- kenniskrag 5y ago
  I learned that during my studies two years ago. Also the leaky abstration in the OSI model was a topic. We had a good prof it seems :)
deleted 5y ago
[deleted]

dragontamer 5y ago

You're right for sure. I probably should have clarified that when I said "Ethernet", I meant classic 10 Mbps Ethernet that today's kids probably don't know about. The Ethernet hub acted like a bus: anything one connection said was broadcast to _ALL_ other connections. Of course, today we have far faster point-to-point switches. But it helps to remember that the Ethernet-protocol was built in the days of old: half-duplex shared communication broadcast to everyone on your hub. ------- Today's wired 1Gbps or 10Gbps ethernet are way way faster than half-duplex channels that 802.11 / Wireless technologies are forced to use (after all: the physics behind 802.11 and walkie talkies remains fundamentally the same) There probably isn't a need for CSMA/CD systems in Ethernet anymore (since today's networks are all dedicated wires). But still, the CSMA/CD system exists for a reason, a legacy of the old "shared ether network communications" that gives rise to the name "Ethernet". (One Ether that everyone on the network can hear simultaneously, like a walkie talkie)

jfoutz 5y ago
Raises hand. I remember discovering promiscuous mode, and a stern talking to from our network engineers. It was obvious I didn't know what the hell I was doing, so I got a great tutorial about the differences between hubs and switches.
noduerme 5y ago
Ahah. As opposed to token ring.
p_l 5y ago
I'd argue that the legacy of CSMA/CD still alive in ethernet is what makes it harder to implement efficient networks, as the switched network kinda tries to emulate the shared bus behaviour.
- dragontamer 5y ago
  I admit that I'm not actually a network engineer at this point. I took a networking course back in college and what I've discussed so far is largely just the basics and how I've internalized my lessons from back then. Looking at CSMA/CD more specifically, as well as "full-duplex Ethernet" (which are 100Mbit, 1Gbit, and 10Gbit modern Ethernet), it seems like CSMA/CD is no longer used in any full-duplex Ethernet Protocol. I'm not 100% sure about that, since its outside the scope of my old studies. But it makes sense to me. It seems like "full duplex Ethernet" can only work with point-to-point communications. If you have point-to-point connections between exactly two stations, there's no need for carrier-sense (CS), multiple-access (MA), or collision-detection (CD) protocols at all. CS: Wait for the current person on the walkie-talkie to say "over" before you yourself start talking. MA: Walkie talkies: many people can access the same channel. CD: If two people accidentally start talking at exactly the same time, they need to independently try to restart-talking. A random-number generator with exponential backoff is common for this sort of thing IIRC, though I'm not keen on the exact details.
  - p_l 5y ago
    The problem is that the switched network has to emulate behaviours that were free on CSMA/CD system. So we get MAC learning, Spanning-Tree Protocol, and ultimately if you want performant large scale ethernet switching (and not just terminate ethernet at point2point) you end up with complex software directly managing forwarding tables (all sorts of SDNs) or essentially turn ethernet into routed network (using IS-IS routing, two standards exists for implementing it, one of them - TRILL - is reportedly backbone of Cisco Nexus Fabric system). There's a reason why another name of Layer 2 ethernet network is "broadcast area".
kenniskrag 5y ago
I learned that during my studies two years ago. Also the leaky abstration in the OSI model was a topic. We had a good prof it seems :)

deleted 5y ago

[deleted]