2 ms·
Did it use the Intel 1405 shift register chip, like the Datapoint 2200, or a different chip? I can't read the part numbers in the briefcase photo, and if the t
by kragen 5y ago
Did it use the Intel 1405 shift register chip, like the Datapoint 2200, or a different chip? I can't read the part numbers in the briefcase photo, and if the text names the shift register used, I missed it.
With regard to serial memories, you mentioned the EDSAC and the IBM 2260, but maybe it's worth expanding on how common serial memories were; I don't know if you think it's worth mentioning in this context, but delay-line analog memory was in use in PAL TVs and VCRs up to at least the 01980s and I think the 01990s, often made from piezoelectrics and fused quartz, and 01960s digital calculators like the Olivetti Programma 101 used magnetostrictive wire-torsion digital delay lines for their memory https://www.nzeldes.com/HOC/DelayLine.htm https://www.nzeldes.com/HOC/DelayLine.htm, which is possibly something I originally learned from your own blog. Turing's Pilot ACE and the UNIVAC I used mercury delay lines http://ed-thelen.org/comp-hist/vs-univac-mercury-memory.html http://ed-thelen.org/comp-hist/vs-univac-mercury-memory.html, and the LGP-30 used a magnetic drum as a sort of magnetoelectromechanical delay line for its 31-bit "architectural" registers. Also, coaxial and lumped-element analog delay lines (similar to Pupinized telephone lines) enabled analog oscilloscopes to plot signals from before the trigger fired rather than only afterwards.
More generally we could get into bubble memory, CCDs, SPI interfaces to RAM, hard disk tracks, etc., as some of the other commenters have mentioned.
- kens 5y agoThanks for the details on serial memories :-) The Apple-1 display used the Signetics 2504 shift register: https://www.applefritter.com/files/signetics2504.pdf https://www.applefritter.com/files/signetics2504.pdf It also used a Signetics 2519 6x40 shift register to hold one line: https://www.applefritter.com/files/signetics2519.pdf https://www.applefritter.com/files/signetics2519.pdf
- kragen 5y agoThanks! Maybe their PMOS nature (P-ness?) is the reason for the annoying voltages? I mean a (contemporary) four-phase-logic shift register wouldn't need those voltages, and of course neither do CMOS shift registers. Though I guess a 1024-bit CMOS shift register would still need a pretty good clock drive current, especially if fabbed at those sizes.