4 ms·
No, you cannot tell the difference between 16/44 and 24/192, unless the 24/192 has enough high frequency content to cause non-linear distortions in your speaker
by aidenn0 5y ago
No, you cannot tell the difference between 16/44 and 24/192, unless the 24/192 has enough high frequency content to cause non-linear distortions in your speakers.
24/192 makes sense for recording because the extra bits give you more headroom to prevent clipping and the higher sampling rate means you can use less aggressive analog low-pass filters on your input.
I should also note that your playback solution likely has higher THD+N than the floor imposed by 16 bits. 16 bits implies a noise floor of -96dB which would be a THD+N of about 0.002%. Your playback equipment is probably 11-14 bits equivalent for the noise floor (-66 to -84dB). With 16 bits of depth you probably won't even be able to tell between a properly and improperly dithered CD that was normalized before down-sampling.
I agree that spatial audio is long overdue. IMO, Ambisonics had the right idea in the 1970s, though it was at least 20 years to early for actual adoption.