4 ms·
In practice, about 10% of total incident energy is likely, based on spacing factor, orientation, shading, etc. 20--35% is optimal, but unlikely to be consisten
by dredmorbius 5y ago
In practice, about 10% of total incident energy is likely, based on spacing factor, orientation, shading, etc. 20--35% is optimal, but unlikely to be consistently achieved.
PV charging cover does seem like an option.
A deployable array, of whatever size is suitable, would be a more flexible and IMO better option.
The notion of a computing device which could function on ambient energy is an interesting / terrifying one, so I follow you there. Low-end chips (apparently Zilog -- the Z-80 from Sinclair fame -- is one of these and popular in low-energy applications) might offer this.
With sufficiently rudimentary text formatting at least a general information device might be possible.
The original Unix ... seems like a reasonably decent candidate for this.
- kragen 5y agoEfficiency depends a lot on illuminance and cell type as well. To hit 35% you need super pricey multijunction PV panels for outer space. The amorphous panels that work best in dim indoor light are only 10% efficient at best. Conventional monocrystalline is 21%. As you point out, shading and orientation can pull you down from those peak numbers. I really liked the Z80 idea myself, because CP/M is close to the minimum system where self-hosted development is a reasonable thing to do, and there are full free-software toolchains for it. But as it turns out, according to the datasheet, the Z80 is super power hungry, like 500 mW when it's running. Two orders of magnitude worse than the STM32L, and three orders of magnitude worse than the Ambiq chips! And there doesn't seem to be a low-power clone. Also, the Z80 isn't very good at running C, even if it's not quite as bad as the 8080 or the 6502. Unix doesn't demand much more than CP/M, but fork() does require some sort of MMU, and writing a large system in an unsafe language probably requires some kind of memory protection for fault isolation in practice (at least an MPU). There's lots of available chips that can do milliwatt computing with the oomph of a SPARC-20 or PowerMac, but none of them have MMUs, not even PDP-11-style segmentation registers, and they also have less RAM. You'd have to compensate for the lower RAM by using secondary storage more aggressively; fortunately, secondary storage is four orders of magnitude lower latency now than it was in SPARC-20 or PowerMac days, but in the submilliwatt regime you're probably limited to I/O rates that are slower than those machines could typically manage. If you're interested, more detailed notes can be found in Dernocua in notes/energy-autonomous-computing.html. Along with, of course, lots of marginally relevant crap. You may be interested in the discussion about Oberon that started the other day if you missed it: https://news.ycombinator.com/item?id=30467122 https://news.ycombinator.com/item?id=30467122
- dredmorbius 5y agoOn efficiencies, my principle points are that kW/m^2 is the maximum attainable insolation and in practice you'll be well below this value. A 10% nominal recovery (100W/m^2) is a good conservative starting point. On CPU architectures and such --- I'm pretty much out of my depth. I'd been in a discussion of the Z-80 a month or few back on Mastodon and asked whether or not there was still any extant usage, I was told there was. My understanding (very shallow, likely wrong) is that present gen versions of the chip are low-power, though there may well be far-better-suited options. On low-end CPU Unices, there's Alan Cox's Fuzix. I followed some of his disucssion of that. There's been less discussion of late, and I'm not sure of specifics. IIRC that was based on 286-ish CPUs, with no MMU. Among the ports I'm aware of is the RaPi Pico. No idea where that falls in your power budget. https://www.cnx-software.com/2021/02/23/fuzix-unix-like-operating-system-ported-to-raspberry-pi-pico-and-esp8266/ https://www.cnx-software.com/2021/02/23/fuzix-unix-like-oper...