3 ms·
The 1-week life is based on something on the order of 30--60 minutes reading per day AFAIU, though I don't have sources or specs handy. It's a typical "value n
by dredmorbius 5y ago
The 1-week life is based on something on the order of 30--60 minutes reading per day AFAIU, though I don't have sources or specs handy. It's a typical "value never to be exceeded in actual use" so far as I'm concerned.
Otherwise, I've given you the information I have, and have pointed you in the directions I'm aware to point you in. My interest and awareness here is modest at best.
With one further exception.
GSeph Electronics is a YouTube channel which has given some technical e-ink demonstrations and might offer further information along the lines of your questions:
See this video demonstration of response times (not what you're looking for, what I have on hand): https://youtube.com/watch?v=KdrMjnYAap4 https://youtube.com/watch?v=KdrMjnYAap4
Video playlist: https://m.youtube.com/c/GSephElec/videos https://m.youtube.com/c/GSephElec/videos
Twitter (via Nitter): https://nitter.kavin.rocks/gsephelec https://nitter.kavin.rocks/gsephelec
I'm curious just what you're thinking of that requires / demands a maximum of 100--1000 mW power draw.
- kragen 5y agoAha, thanks! So it's closer to my high-end number, 2000-9000 milliwatts. Thanks for the links! What I'm interested in is lightness, autonomy, resilience, and durability. Batteries are terrible for these because they are heavy, they are difficult to make and repair, they spontaneously catch fire, and they wear out very quickly, typically in about two years in the case of lithium-ion batteries. Moreover, if you need multiple watts of power, it's a real hassle to recharge the battery without plugging in. Reducing the size of batteries reduces these problems somewhat, but you need to eliminate the batteries entirely if you want a computer that can last 50 years. As I said in my comment above: > Pulling once on a pullstring to wind up your computer yields potentially about 25 J. At 300 mW that yields a minute and a half of usage. At 3 mW, two and a half hours of usage. At 0.2 mW, 34 hours of usage. So below 1 mW you're into solar-calculator territory; I disassembled one of those solar garden lights with an LED and a rechargeable battery in it and measured its 38 mm square panel at 8 mW. A few years ago this sort of thing was infeasible: memory LCDs didn't exist, subthreshold processors were confined to laboratories, and SSDs were both power-hungry and slow. Now all the pieces have come together to make it possible to build a 10-MIPS workstation (burstable to 1000 MIPS), easily capable of rebuilding all of its own system software, with a screen comparable to the original Macintosh (but smaller, and readable in sunlight), with hundreds of gigabytes of storage, that runs on under a milliwatt. But it can only have a few megabytes of RAM, so it needs differently designed software. What would such a thing be useful for when our cell phones have become pocket supercomputers with multi-megapixel displays, always-on multi-megabit internet connections, gigabytes of RAM, and teraflops vector GPUs? Well, they don't actually work very well for writing a novel, reading a book in the park, designing a circuit board, writing a video game, ssh, or even plain text email, they run out of battery after only a few hours of continuous use, they're fragile in part because they're heavy, and you have to replace them every few years, generally without the option to transfer your existing customized environment to the new hardware. They're difficult to back up (except to sharecropping PRISM landlords like Google and Apple), they stop being able to so much as set an alarm when their filesystem gets full, and they're designed to disrupt your mental focus rather than sharpening it. I think you should be able to render epub files, PDFs, Kiwix dumps, and OpenStreetMap maps in a few megabytes of RAM, especially with modern microsecond-latency NAND flash instead of floppy disks as secondary storage, and obviously that's plenty of RAM for an editor, a GUI, a high-level programming language, or a cryptocurrency wallet. And you should be able to design it lightweight and waterproof enough to take to the park or on a camping trip; the display I linked above has 0.1 megapixels in 60×35 mm, so original-Macintosh resolution is 60×70 mm.
- dredmorbius 5y agoI'm ... questioning utility here, though if you want to pursue this, I guess that's OK. I have a few general concerns: For any human-oriented computing based on accessing remote or general-distribution content, I think you'll find that as compute power gets cheaper, the response will be for payloads and tasks to become ever more complex. What used to be communicated in plain-text email, talk(1), or write(1) payloads is now wrapped in apps or JSON or HTML+CSS+JS, where the package-to-payload ratios often run 100:1 or worse. PDF documents become ever more complex and heavy. Your ultra-low-power system simply won't keep up. I'd resurrected a 2005-era system for general use over the past few years. It was great for pretty much anything except surfing the Web. Firefox + 2-3 tabs would routinely lock the system. Terminal-mode browsers were far more viable, though much of the Web is now inaccessible to those. So that's the first problem. The second was a realisation I'd had a few years back that with the falling cost of SoCs and the like, a period where a full computing system would be available at less than a $1/unit price point (and falling from there at the rate of an order of magnitude every 3 Moore's cycles or so, that is, about every 6--8 years), was close. The major problems at that point are power and comms. Current-generation logistics tracking, particularly for orientation, shock, and temperature excursions, are based on physical detectors. These tend to change state if tolerances are exceeded and require direct observation to detect that shipping violated spec, but now when. With a $0.10 adhesive-affixed data logger having an integrated WiFi or SIM capability, days, weeks, or months of data logging at 1s -- 1m resolution are possible. A one second resolution costs you ~2 MB storage per data channel byte month, uncompressed. And it should compress fearsome well. Surveillance devices don't need e-ink displays ... but might be all the more interesting if they offered these. As for solar power: the Max Lumi has a surface area of roughly 1/16 m^2 (the size of a sheet of A4 paper). With a case that has an integrated solar cell, that ought to be good for 6 W power, or 48 WH given 8 hours of irradiance per day. (Mind: you can't use the device whilst it's charging, but ... let's roll with that.) At a power draw of 2000-9000 mW, or 2-9W, the cell by itself could ... mostly keep up with the draw of the device itself. And if you had a battery to store that energy ... The Max Lumi with battery masses at about 500g. My thinking is that you're far better off having your power source off-device. An external solar panel can be much larger than the device, and pull in far more energy. Again, that can be stored in various systems, and yes, batteries are a mess, but they're a pretty decent mess. For the forseable future you're sacrificing a lot of capability by excluding them.