2 ms·
I don't know, and the information's hard to come by --- I'm not finding a ready answer via search. There might be information from E-ink themselves (the displa
by dredmorbius 5y ago
I don't know, and the information's hard to come by --- I'm not finding a ready answer via search. There might be information from E-ink themselves (the display vendor), though they're also pretty tight-lipped.
It's battery powered. Consumption depends on usage patterns.
The battery on the Max Lumi 2 is 4300 mAh. Under my typical usage which includes much Web browsing, use of frontlights, and WiFi, 1--2 day battery life is typical. Optimized for e-book reading only (no radios or lights, periodic page turns), up to a week. If you're just looking at a static image ... forever.
Running as an active display, I'd expect battery usage to the lower end of the range and for the display interface itself (HDMI) to account for a good chunk of that, though this is pretty uninformed speculation.
Specs: https://onyxboox.com/boox_maxlumi2 https://onyxboox.com/boox_maxlumi2
Cutting out the middleman, if you're looking at e-ink monitors, there are the Mira and Mira Pro:
https://onyxboox.com/boox_mira https://onyxboox.com/boox_mira
https://onyxboox.com/boox_mirapro https://onyxboox.com/boox_mirapro
Again, neither offer a specific power consumption rating.
The Mira is effectively the Max Lumi display in a monitor package. No power draw spec that I see though it's drawn over USB-C.
The Mira Pro is a 25.3" E Ink Carta display with a lower dot pitch (145 dpi) at 3200x1800.16 bit greyscale.
I'd suspect that the major draw would be in the HDMI interface itself, as well as whatever the update frequency was.
With e-ink itself, persistence is free, colours are few, paints are expensive. Pagination or cell updates (e.g., text terminals) probably fare better than raster graphics. Running additional processing (e.g., Web rendering, audiobook processing, frontlights, WiFi, Bluetooth) cut into battery life, though it remains excellent.
- kragen 5y agoIs that 4300 mAh battery 3.7V or 7.4V? Is that a week of reading half an hour a day (3.5 hours total) or 24 hours a day? These intervals give a range of 95 mW (slightly less than a Swindle) to 9100 mW for "Optimized for e-book reading only (no radios or lights, periodic page turns), up to a week." For my purposes neither 100 mW or 10000 mW counts as "excellent battery life". Like I said, what I'm interested in is submilliwatt computing. Enough processing for an interactive computing environment is a lot lower power than running an e-ink display, comparable to the SHARP Memory LCD. Even conventional CMOS microcontrollers like the STM32L are down around 200 pJ per 32-bit instruction, at which rate running a conventional CLI environment (150 kips, like a C64 or CP/M box) costs about 0.03 mW, though you start to run into leakage and wakeup limits, and a 3M workstation like the Sun or PERQ (1 megapixel, 1 megabyte, 1 MIPS) should cost 0.2 mW. The Ambiq subthreshold line claims closer to 30 pJ per instruction, putting the 3M performance level back down to 0.03 mW, plus 68 μA overhead, which at 3.3V is 0.22 mW. You can totally do web browsing at that speed but we're talking Elinks or Dillo, not Servo or Blink (and so not Slack or Fecebutt).
- dredmorbius 5y agoThe 1-week life is based on something on the order of 30--60 minutes reading per day AFAIU, though I don't have sources or specs handy. It's a typical "value never to be exceeded in actual use" so far as I'm concerned. Otherwise, I've given you the information I have, and have pointed you in the directions I'm aware to point you in. My interest and awareness here is modest at best. With one further exception. GSeph Electronics is a YouTube channel which has given some technical e-ink demonstrations and might offer further information along the lines of your questions: See this video demonstration of response times (not what you're looking for, what I have on hand): https://youtube.com/watch?v=KdrMjnYAap4 https://youtube.com/watch?v=KdrMjnYAap4 Video playlist: https://m.youtube.com/c/GSephElec/videos https://m.youtube.com/c/GSephElec/videos Twitter (via Nitter): https://nitter.kavin.rocks/gsephelec https://nitter.kavin.rocks/gsephelec I'm curious just what you're thinking of that requires / demands a maximum of 100--1000 mW power draw.
- kragen 5y agoAha, thanks! So it's closer to my high-end number, 2000-9000 milliwatts. Thanks for the links! What I'm interested in is lightness, autonomy, resilience, and durability. Batteries are terrible for these because they are heavy, they are difficult to make and repair, they spontaneously catch fire, and they wear out very quickly, typically in about two years in the case of lithium-ion batteries. Moreover, if you need multiple watts of power, it's a real hassle to recharge the battery without plugging in. Reducing the size of batteries reduces these problems somewhat, but you need to eliminate the batteries entirely if you want a computer that can last 50 years. As I said in my comment above: > Pulling once on a pullstring to wind up your computer yields potentially about 25 J. At 300 mW that yields a minute and a half of usage. At 3 mW, two and a half hours of usage. At 0.2 mW, 34 hours of usage. So below 1 mW you're into solar-calculator territory; I disassembled one of those solar garden lights with an LED and a rechargeable battery in it and measured its 38 mm square panel at 8 mW. A few years ago this sort of thing was infeasible: memory LCDs didn't exist, subthreshold processors were confined to laboratories, and SSDs were both power-hungry and slow. Now all the pieces have come together to make it possible to build a 10-MIPS workstation (burstable to 1000 MIPS), easily capable of rebuilding all of its own system software, with a screen comparable to the original Macintosh (but smaller, and readable in sunlight), with hundreds of gigabytes of storage, that runs on under a milliwatt. But it can only have a few megabytes of RAM, so it needs differently designed software. What would such a thing be useful for when our cell phones have become pocket supercomputers with multi-megapixel displays, always-on multi-megabit internet connections, gigabytes of RAM, and teraflops vector GPUs? Well, they don't actually work very well for writing a novel, reading a book in the park, designing a circuit board, writing a video game, ssh, or even plain text email, they run out of battery after only a few hours of continuous use, they're fragile in part because they're heavy, and you have to replace them every few years, generally without the option to transfer your existing customized environment to the new hardware. They're difficult to back up (except to sharecropping PRISM landlords like Google and Apple), they stop being able to so much as set an alarm when their filesystem gets full, and they're designed to disrupt your mental focus rather than sharpening it. I think you should be able to render epub files, PDFs, Kiwix dumps, and OpenStreetMap maps in a few megabytes of RAM, especially with modern microsecond-latency NAND flash instead of floppy disks as secondary storage, and obviously that's plenty of RAM for an editor, a GUI, a high-level programming language, or a cryptocurrency wallet. And you should be able to design it lightweight and waterproof enough to take to the park or on a camping trip; the display I linked above has 0.1 megapixels in 60×35 mm, so original-Macintosh resolution is 60×70 mm.