4 ms·
This functionality is part of some devices (or rather the softwre loaded on them), as with the Onyx BOOX Max Lumi series, which provides a 13.3" 220 dpi 1650x22
by dredmorbius 5y ago
This functionality is part of some devices (or rather the softwre loaded on them), as with the Onyx BOOX Max Lumi series, which provides a 13.3" 220 dpi 1650x2200 16-shade greyscale display.
I've not used it in that that mode, though I've certainly used it with Termux as a terminal driver. There are also freestanding displays sold. At larger sizes there is a considerable price premium.
The Max Lumi runs $800--$900 itself.
- kragen 5y agoWhat's the power consumption of the Max Lumi? That's the crucial thing here! I'd be satisfied with 80×24 characters (400 × 192 pixels without grayscale). It's not optimal, but it's adequate for reading, including hypertext browsing of Kiwix, and writing, including text and code. The Nokia 84×48 pixel screen is inadequate.
- dredmorbius 5y agoI don't know, and the information's hard to come by --- I'm not finding a ready answer via search. There might be information from E-ink themselves (the display vendor), though they're also pretty tight-lipped. It's battery powered. Consumption depends on usage patterns. The battery on the Max Lumi 2 is 4300 mAh. Under my typical usage which includes much Web browsing, use of frontlights, and WiFi, 1--2 day battery life is typical. Optimized for e-book reading only (no radios or lights, periodic page turns), up to a week. If you're just looking at a static image ... forever. Running as an active display, I'd expect battery usage to the lower end of the range and for the display interface itself (HDMI) to account for a good chunk of that, though this is pretty uninformed speculation. Specs: https://onyxboox.com/boox_maxlumi2 https://onyxboox.com/boox_maxlumi2 Cutting out the middleman, if you're looking at e-ink monitors, there are the Mira and Mira Pro: https://onyxboox.com/boox_mira https://onyxboox.com/boox_mira https://onyxboox.com/boox_mirapro https://onyxboox.com/boox_mirapro Again, neither offer a specific power consumption rating. The Mira is effectively the Max Lumi display in a monitor package. No power draw spec that I see though it's drawn over USB-C. The Mira Pro is a 25.3" E Ink Carta display with a lower dot pitch (145 dpi) at 3200x1800.16 bit greyscale. I'd suspect that the major draw would be in the HDMI interface itself, as well as whatever the update frequency was. With e-ink itself, persistence is free, colours are few, paints are expensive. Pagination or cell updates (e.g., text terminals) probably fare better than raster graphics. Running additional processing (e.g., Web rendering, audiobook processing, frontlights, WiFi, Bluetooth) cut into battery life, though it remains excellent.
- kragen 5y agoIs that 4300 mAh battery 3.7V or 7.4V? Is that a week of reading half an hour a day (3.5 hours total) or 24 hours a day? These intervals give a range of 95 mW (slightly less than a Swindle) to 9100 mW for "Optimized for e-book reading only (no radios or lights, periodic page turns), up to a week." For my purposes neither 100 mW or 10000 mW counts as "excellent battery life". Like I said, what I'm interested in is submilliwatt computing. Enough processing for an interactive computing environment is a lot lower power than running an e-ink display, comparable to the SHARP Memory LCD. Even conventional CMOS microcontrollers like the STM32L are down around 200 pJ per 32-bit instruction, at which rate running a conventional CLI environment (150 kips, like a C64 or CP/M box) costs about 0.03 mW, though you start to run into leakage and wakeup limits, and a 3M workstation like the Sun or PERQ (1 megapixel, 1 megabyte, 1 MIPS) should cost 0.2 mW. The Ambiq subthreshold line claims closer to 30 pJ per instruction, putting the 3M performance level back down to 0.03 mW, plus 68 μA overhead, which at 3.3V is 0.22 mW. You can totally do web browsing at that speed but we're talking Elinks or Dillo, not Servo or Blink (and so not Slack or Fecebutt).
- dredmorbius 5y agoThe 1-week life is based on something on the order of 30--60 minutes reading per day AFAIU, though I don't have sources or specs handy. It's a typical "value never to be exceeded in actual use" so far as I'm concerned. Otherwise, I've given you the information I have, and have pointed you in the directions I'm aware to point you in. My interest and awareness here is modest at best. With one further exception. GSeph Electronics is a YouTube channel which has given some technical e-ink demonstrations and might offer further information along the lines of your questions: See this video demonstration of response times (not what you're looking for, what I have on hand): https://youtube.com/watch?v=KdrMjnYAap4 https://youtube.com/watch?v=KdrMjnYAap4 Video playlist: https://m.youtube.com/c/GSephElec/videos https://m.youtube.com/c/GSephElec/videos Twitter (via Nitter): https://nitter.kavin.rocks/gsephelec https://nitter.kavin.rocks/gsephelec I'm curious just what you're thinking of that requires / demands a maximum of 100--1000 mW power draw.
- 5y ago