Not in the UK, its set by the cabinet which in my case is a Broadcom running version 12.3.16. So one of the reasons why its set by the cabinet is they charge d

Not in the UK, its set by the cabinet which in my case is a Broadcom running version 12.3.16. So one of the reasons why its set by the cabinet is they charge different fees for different connection speeds. So in the UK if you are limited to say a 40Mb or 80Mb download and whatever upload, when your adsl router/modem connects or negotiates a speed (max DSLAM throughput), even if you could negotiate a 100Mb speed, you would be throttled to whatever you package speed is and then with things like TR069 (https://en.wikipedia.org/wiki/TR-069 https://en.wikipedia.org/wiki/TR-069) they can remote control your router. So that will include disconnecting your ADSL connection, reconnecting and giving you a new IP address if you dont pay for a fixed ip address. One ISP I tested could reset the connection and give you new IP address every second, it was literally as quick as the device could handle getting the new ip address in bridge mode. Some firewall products also do throttling, its part of what is called traffic shaping as explained here (some reasonable docs) https://forum.netgate.com/topic/20089/how-to-using-squid-for-bandwidth-throttling https://forum.netgate.com/topic/20089/how-to-using-squid-for... Traffic Shaping in general https://docs.netgate.com/pfsense/en/latest/trafficshaper/limiters.html https://docs.netgate.com/pfsense/en/latest/trafficshaper/lim... AFAIK the adls cabinets also have a separate RF communication channel possibly as an independent backup if the mainlines go down but power still remains. I know if the engineers so much as opens the door to a cabinet, it phones home possibly over the RF or maybe using both network and RF, havent established that yet, but things are quite joined up here from what I've been able to tell. Other factors will which affect the DSL speed are the stability settings, so do you have little to no interference and error checking for max speed or do you go cautious and have lots of interference mitigation enabled on the adsl modem/router. Think of adsl as loads of radio stations all transmitting down a wire, to get more speed you tune into and listen to more radio stations all at the same time. For slower speeds you tune into just a couple radio stations. The frequency of the "radio" station also counts, like listening to poor radio quality on Long wave which can bounce around the planet, Medium Wave which can cover a sizable area or Frequency Modulation which you need to be close by to get. Same as mobile phone 2G, 3G, 4G & 5G. The bubble or area of 2G is massive, where as 5G is tiny, but that tiny bubble can transmit alot unlike 2G which is slower. Same sort of concept just transmitted & contained down a wire instead of over the air. One reason hard coding the route in the modem is it can prevent random accesses to the GUI from malware in the computer or in other network devices and then other network security can come into play. There's a lot of info in this post, and will be similar and thus relevant for hacking other devices.