4 ms·
Electric arc furnaces for steel don't typically immerse the electrodes in the molten metal (in the slag on top of the molten metal, yes.)
by pfdietz 5y ago
Electric arc furnaces for steel don't typically immerse the electrodes in the molten metal (in the slag on top of the molten metal, yes.)
- kragen 5y agoOh, of course you're correct, thank you. How high is the solubility of graphite in molten iron?
- pfdietz 5y agoIron/carbon phase diagram: http://www.substech.com/dokuwiki/doku.php?id=iron-carbon_phase_diagram http://www.substech.com/dokuwiki/doku.php?id=iron-carbon_pha... The eutectic of iron and carbon (mixture with the minimum melting point) is 4.3% carbon by mass. There's a chapter from Richard Preston's "American Steel" (a 1992 book that I highly recommend about the Nucor minimill in Crawfordsville, Indiana) where they find at one point during the startup of the then-cutting-edge continuous casting line that the steel in arc furnace had too little carbon. They decided to solve that (expensively, for the purpose of the testing) by dipping the electrodes into the steel and letting their ends dissolve.