3 ms·
A 0dB tone is a tuning tone. Most amplifiers are tuned to a particular frequency at 0dB, and with a good phone connection, you can even do this over the wire.
by billwear 5y ago
A 0dB tone is a tuning tone. Most amplifiers are tuned to a particular frequency at 0dB, and with a good phone connection, you can even do this over the wire. It's problematic if there are too many hops between you and the source. For example, calling a 0dB tone in a small CO in central Montana didn't give me a usable reference when I was calling from Huntsville, AL, in the 1970's. There were about four hops in there.
- myself248 5y agoIt was originally 1000Hz, but it turns out this could cause framing errors on D4 trunks because the framing recovery circuit could misidentify the bit pattern as valid framing bits. So they changed it to 1004Hz, enough to sidestep the problem, but still close enough that it would still represent "exactly" a milliwatt of energy, within the required precision of the instruments anyway. When ESF framing was invented, precise tones no longer posed a problem, but a lot of D4 trunks hung around for decades, so last I checked most milliwatt tones were still 1004Hz.