5 ms·
Author here for your Polaroid camera questions :-)
by kens 5y ago
Author here for your Polaroid camera questions :-)
- s800 5y agoSo the integrator circuit implies it determines the exposure time during the exposure? Meaning, the metering is ongoing during the shutter opening?
- kens 5y agoYes. It's a pretty clever circuit. You can think of film as integrating the amount of light that falls on it, so the photodiode integrator is computing the same thing. So the film will get enough light at the same time the integrator gets enough light. By closing the shutter at that time, the film is properly exposed.
- foldr 5y agoThe Olympus OM series had some particularly ingenious integrative metering modes, including metering light reflected off the film itself. https://www.dpreview.com/forums/post/24653220 https://www.dpreview.com/forums/post/24653220
- deleted 5y ago[deleted]
- morpheuskafka 5y agoThat's very interesting. Just picked up an OM-4 the other week as my first film camera, I knew it was one of the first to have multi-spot metering but just assumed it was standard TTL technology.
- grozzle 5y agoNot sure if I'm mis-reading this a surprised reaction, but if so, using light reflected from the film inside the camera body _is_ the standard TTL technology. https://mir.com.my/rb/photography/hardwares/classics/nikonfeseries/fe2/basic9.htm#:~:text=TTL%20flash%20metering%20adds%20a,for%20a%20proper%20flash%20exposure https://mir.com.my/rb/photography/hardwares/classics/nikonfe....
- morpheuskafka 5y agoInteresting. The parent thread in the linked forum said that other bodies used a different method, so I assumed that was the standard. > Yep, it applies to almost every AE SLR ever made. Notable exceptions were cameras like the OM-4 that metered off the film during exposure, or others that meter off the closed shutter curtain before exposure. But the vast majority meter from the focus screen so are susceptible to light entering through the eyepiece.
- boondaburrah 5y agoI have an Olympus XA that similarly has a light meter that's active when the shutter's open and closes it when it's "full." It actually has two light meters, and one of the problems it can have (mine did) is that the light meter that tells you what your exposure will be in the view finder and the light meter inside the body may not agree. The issue was that the internal meter became far slower such that I would see a (correct) value in the viewfinder and then the film would be overexposed by 2 stops. I tested this using slide film and lying to the camera about the ISO by 2 stops and suddenly everything wasn't blown out anymore. There's a potentiometer hidden inside the body that you can use to adjust the internal sensor's timing (fill rate?) and using audacity to measure the ms between shutter clicks I was able to adjust it to match the viewfinder's reading again.
- ravila4 5y agoI have a couple of these cameras. How difficult is it to get an OpenSX70 circuit PCB printed and installed? Is this something achievable by an average tinkerer?
- kens 5y agoI don't know the details of the OpenSX70 boards; I just looked at the Polaroid chips :-)
- jdkee 5y agoWill you be investigating the sonar system developed for later cameras such as the SLR 680?
- kens 5y agoThe sonar system is very cool, but I probably won't be investigating it.
- ochrist 5y agoI inherited a Polaroid Supercolor 635 from my dad, who passed away more than twenty years ago. It's just lying in the basement, and I don't know what to do with it. Is it worth anything? Can you still buy film for it?