2 ms·
Lots of old lightweight materials show tensile strength greater than steel. For instance, oh, nylon fiber is stronger than some steels, and way less dense: ht
by kazinator 5y ago
Lots of old lightweight materials show tensile strength greater than steel.
For instance, oh, nylon fiber is stronger than some steels, and way less dense:
https://en.wikipedia.org/wiki/Ultimate_tensile_strength#Typical_tensile_strengths https://en.wikipedia.org/wiki/Ultimate_tensile_strength#Typi...
One kind of steel, "ASTM steel" comes in at 400-500 MPa; nylon fibers at 900.
Check out the Bamboo entry in the table. Human hair is also impressive.
- timlarshanson 5y agoYep. This is a very interesting material, and of course it's a research prototype -- but it's not very strong. They list the modulus as 12.7 GPa and the yield strength (= ultimate tensile strength, since the film tears) as 488 MPa. In comparison, polyimide (PMDA-PPD), which also easily solvent processable, has a modulus of 8.9 GPa, and a yield strength of 350 MPa. Less equal comparisons involve polymers that are molecuarly aligned by drawing, spinning, or chemical processes. Dyneema UHMEPE has a modulus of 110 GPa and a ultimate tensile strength of 3.5 GPa. Kevlar is similar; it utilizes interlocking hydrogen bonds to convey strength. Even stronger are glass fibers (>4 GPa tensile strength) or PAN carbon fiber (> 6 GPa tensile strength). You of course lose some strength when you make composites out of fiber -- but irregardless this polymer is many times weaker and softer.
- TheSpiceIsLife 5y agoBIS80 is a structural steel who's formula is owned by Bisalloy and produced under license by steel manufacturers. BIS80 has a yield strength in excess of 620 Mpa, and an ultimate tensile strength in the range 720 to 930 Mpa. See here for more info https://www.bisalloy.com.au/wp-content/uploads/2020/06/BISALLOY%C2%AE-STRUCTURAL-80-STEEL-1.pdf https://www.bisalloy.com.au/wp-content/uploads/2020/06/BISAL... BIS100 has a yield strength around the 890 MPa mark, and an ultimate tensile strength in the range 940 to 1100 MPa. See here for more info https://www.bisalloy.com.au/wp-content/uploads/2020/06/BISALLOY%C2%AE-STRUCTURAL-100-STEEL.pdf https://www.bisalloy.com.au/wp-content/uploads/2020/06/BISAL... Nylon is lighter, but it also loses about 20% of its tensile strength when wet.
- kazinator 5y agoFWIW, that Wikipedia table lists several steels which have a much higher ultimate tensile strength.
- TheSpiceIsLife 5y agoI see that now I've opened it ;) I'm familiar with the Bisalloy steels because I have them here right in front of me (metal fabricator by trade and laser cutter operator past 8 years).