2 ms·
WHAT STORE DID YOU BRING THE PI TO? IS IT STILL THERE? I'll second the recommendation for real PC hardware. Tinkering is fun up until it's not. When it becomes
by mindslight 5y ago
WHAT STORE DID YOU BRING THE PI TO? IS IT STILL THERE?
I'll second the recommendation for real PC hardware. Tinkering is fun up until it's not. When it becomes not fun is when something breaks, takes down a system you have come to rely on, and now it becomes work to recreate the functionality you used to take for granted. Seeing people go for the RPi for something they're going to put a lot of hours into makes me cringe a bit, having had several SD card filesystems get corrupt. If that's what it takes to get you started with self hosting, by all means go for it. But there is much nicer hardware for running servers on.
Having said that, I still use RPis for edge devices and the like.
PS I really like that idle power figure on your server. I wish there were a list of power consumption figures for integrated hardware, it seems quite hit or miss.
- spookthesunset 5y agoYou can fix that SD problem by booting off a USB SSD instead. Much faster and more reliable.
- mindslight 5y agoI want to use a Pi4 8GB as an arm64 build host so I'm going the USB SSD route there. But adding on additional hardware ultimately seems like the "stone soup" (https://en.wikipedia.org/wiki/Stone_Soup https://en.wikipedia.org/wiki/Stone_Soup) version of setting up a server. Furthermore I'm hesitant to rely too much on the arm ecosystem in general. If one pops a drive with a Linux installation into any amd64 machine, it straightforwardly boots. Whereas just making an arm device boot can be its own tinkering session of figuring out its own bespoke partitioning scheme, firmware files, and U-boot image. Many times you're stuck using a non-mainline kernel since that's what the embedded developers hacked on to get something running. Devicetree compiler what? And sure, using a purpose-built distro can hide much of the complexity, until that distro decides your device is too old and drops support. Heck, I've even moved my wifi AP's over to low power amd64 machines instead of the popular answer of OpenWRT/DD-WRT. When I want to upgrade to a new wifi standard, I'll just pop in a new wireless card. The same machines also run Kodi for the TVs (which used to be separate RPis).
- BackBlast 5y agoI've gone this route as well. I had good luck with certain SD cards, and earlier versions of the Pi for small things. But I've tried to use them as wireless APs, and they fold under any real use. Wireless firmware hangs requiring a full reboot to fix. Pi4s have given me a ton of trouble, and I've been on the losing side of the SD card roulette and had USB drives fail under load. There is always some kind of IO or sagging voltage problem with a power supply wigging out or I got a bad one. Moved to using low power thin clients on liquidation for similar pricing, and it's all been a breeze. I get real disk IO. I get a real wireless card which runs an AP night and day better. I get a real USB power budget with a much more trustworthy OEM power supply. Power profile and size is about double, but it's a very worthwhile trade. I like the 1L system profiles and lean to the HPs. I don't mind ARM in the cloud, but at home I just want real hardware.