4 ms·
As I understand it, transmission typically takes modulated RF and boosts it. Its applying brute force to a pre-shaped signal as the "carrier". The RF has to com
by ggm 5y ago
As I understand it, transmission typically takes modulated RF and boosts it. Its applying brute force to a pre-shaped signal as the "carrier". The RF has to come into the amplification stage over a waveguide. Typically it's being sent from somewhere else, down a landline or local point to point microwave link. If you can "flood" the amplifiers input with a stronger signal generated locally, with either a path into the RF waveguide or a strong directional antenna and a receiving dish for the microwave signal, it will latch on to it, and amplify it too. If it's stronger at source, it's stronger post amplification/transmission. Being stronger at source is easy if you are close.
It probably does not work as well on a digital stream, or a multichannel, agile frequency hopping signal but these tend to be short range. These numbers stations have to work with old, crude and remote receivers and with more traditional (deliberate) interference from distant sources so they are more prone to being subverted by a motivated local phreaker who can inject a strong signal from e.g. a car parked close by and then run away.
You would think military communications are 24/7 guarded but perhaps in some economies people assume distance from the urban area is protection. It doesn't stop motivated attacks. By the time you find out, they've taken the Max Headroom VHS and their radio rig away in an anonymous van.
Maybe this attack is smarter? Doing something less brute force and not just flooding the last-stage RF amplifier?
- gruez 5y ago>If you can "flood" the amplifiers input with a stronger signal generated locally, with either a path into the RF waveguide or a strong directional antenna and a receiving dish for the microwave signal, it will latch on to it, and amplify it too. In other words, those russian radio transmitters are like open relays? It will amplify any signal you feed to it?
- ggm 5y agoI think, (and as a non-Ham, I expect to be corrected on this), putting to one side the numbers stuff is meant to be "modem-like" tone encoded signals and so implicitly sort of digital, to the radio amplification its just analogue waves. Amplifying for transmission happens as close to your antenna as possible. You're pumping out radio waves. Not amplifying "bits", you're amplifying waves. Or phase encoded, whatever, The last stage amp is not able to discriminate what's to be amplified, what comes in is what goes out into the masts. This 40s/50s/60s/70s long distance radio stuff, is pretty much dumb tech. It's not just Russian transmitters, a lot of the old VHF TV was capable of being subverted by brute force injection, and FM radio. All you have to do is assert a stronger time signal and it's going to cohere to it. There are awesome photos on the Web of these transmitters, huge valves, mercury rectifiers, scary giant coils, oil cooled stuff, it's RF but you treat it like power engineering, because energy is energy: it's "hot". If you were building one now, you'd send encrypted signal digitally into the gear and avoid as many of the risks as possible. Probably have to be right up close inside the building to phreak the last stage amplifier. Some ham or ex forces RF person will probably say I got this wrong btw. I'd believe them.
- op00to 5y agoThe beeping is almost certainly just to hold the frequency. There is no digital component. The pirate has another HF transmitter somewhere else with a good antenna and an amplifier. There is no “carrier” on USB transmissions. It is suppressed, so many transmissions can be received at once.
- spicybright 5y ago> There are awesome photos on the Web of these transmitters ... What would I have to google to learn more about this? it sounds fascinating.
- ggm 5y agoThe really good ones are pre 1940s. Look up klystron, or arc transmitters
- jacquesm 5y agoAnd while you're at it, https://upload.wikimedia.org/wikipedia/commons/0/04/Pole_2_Thyristor_Valve.jpg https://upload.wikimedia.org/wikipedia/commons/0/04/Pole_2_T... (human for scale) and https://upload.wikimedia.org/wikipedia/commons/thumb/4/42/Mercury_Arc_Valve%2C_Radisson_Converter_Station%2C_Gillam_MB.jpg/1280px-Mercury_Arc_Valve%2C_Radisson_Converter_Station%2C_Gillam_MB.jpg https://upload.wikimedia.org/wikipedia/commons/thumb/4/42/Me... This is high power HVDC transmission line gear.
- raducu 5y agoFunny because a while ago I had some problems with a somewhat noisy neighbor listening to dubious music at odd hours -- not enough to even record his music on my phone, but I live in an old apartment building and it was enough to keep me up at night; in fact once I made peace with it I could sleep through his noise. So I remembered back in the day I could hear beeps in my speakers when my cell phone rang and I wondered it I could do the same to his speakers. After a lot of search I found out that a lot of speaker amplifiers were vulnerable to CB frequency injection and being close enough you could actually highjack some vulnerable speakers/amplifiers given you were close enough/transmitting at the right frequency and power. In the end I just angrily knocked at my neighbor's door at 2AM and complained about the noise, he apologized, turned down the volume and I've never had problems ever since. I got to know the guy eventually when some other neighbor flooded our toilets by pouring concrete down the toilet drain, he was just a nice uber driver in his 40s having problems with his wife, drinking into the night and listening to dubious gypsy blues that resonated to his sorrows.
- deleted 5y ago[deleted]
- jacquesm 5y agoThis is exactly how pirate radio stations used to get presence on CASEMA, the Amsterdam cable system. Especially at night there wasn't a relay frequency that wasn't occupied, with some of the pirate radio stations duking it out for dominance on the receivers. Prime property was near Centrale Hemweg and the Okura hotel, both at the time some of the highest real estate in Amsterdam so that's where the receiving antennas were located.
- curiousfab 5y agoThere's a good chance that this transmission comes from a completely different transmitter / location, and it is just on the same frequency as the Russian transmitter. You can do this with amateur means (a simple dipole antenna and a amplifier in the low kilowatt range, plus a SDR to generate the signal); in fact many radio amateurs are already equipped to do this at any time. Here's some background on the "spectrum painting": https://www.rtl-sdr.com/tag/spectrum-painter/ https://www.rtl-sdr.com/tag/spectrum-painter/
- Johnythree 5y agoSorry, but no. These pirates are simply transmitting on the same frequency. There's no way they are "hacking" the original signal.