3 ms·
Just wait until it’s machining! Wood working at least most of the time tolerances are +- 1/8”. Throwing away a thousand dollar part because you were .003” off i
by lazide 5y ago
Just wait until it’s machining! Wood working at least most of the time tolerances are +- 1/8”. Throwing away a thousand dollar part because you were .003” off is lame.
At least if you have a grinder, welding can sometimes be more forgiving.
- lkois 5y agoOof, I used to work with one of the few workshops in the world that could produce small batches of parts down to 0.0001mm or something a bit ridiculous. Their pricing and supply times factored in a pretty significant failure rate, and we were basically asking them for highly precise screws and nuts for a couple thousand each.
- andi999 5y agoFor what application would one need such a precision?
- lkois 5y agoInternational standards for reference connectors for medical devices. Basically, if you make syringes or IV lines with a screw fitting, the dimensions of that fitting need to be within some range so it'll make a secure connection to something else. Those are made out of plastic, all materials and dimensions are well defined for their usage and mass production, and have a decent tolerance to them. But to check THAT tolerance, you have these metal screws that they need to securely attach or be unable to attach to. And since the metal fittings will be used for batch testing entire production runs of life or death parts for years to come, they go a little overboard with specifications. I'm not sure if it really needed to be THAT precise, but that's just what it was
- repiret 5y agoYou can fudge 1/8” in some things, but lots of woodworking has to be way more precise. Just about any joinery, parts of cabinetry, parts of finish carpentry.