3 ms·

You can do 99.999% of practical applications of electricity with the liquid analogy, up to and including most industrial electrical stuff (remember, check valve

You can do 99.999% of practical applications of electricity with the liquid analogy, up to and including most industrial electrical stuff (remember, check valves, accumulators and whatnot are a thing). What you can't do is design a bottom dollar power supply that uses some trick circuitry to not emit enough RF noise to matter.

sandworm101 5y ago
>> 99.999% of practical applications of electricity All radio/wifi and everything involving fiber optics or magnets. That's probably slightly more than 00.001% of applications.
- ionicgiraffe 5y ago
  Not still a good analogy, but radiation can be seen as a consequence of vacuum not being empty from the perspective of an electric field (it has a very low permittivity, but it is not zero, so it is not empty of that property) even though it is empty of mass. If your water pipes are a bit porous and the medium on which your water pipes are was not air, but a very dense fluid, radiation emanating from the porous pipes would travel at the speed of sound through the medium, and could be detected without particles of water actually travelling through the dense fluid that constitutes the medium where your hydraulic circuit is submerged.
stephen_g 5y ago
I'm specifically talking electronics, where the usefulness runs out very quickly... As soon as you get to EMI/EMC there is no real liquid analogy (so that rules out basically any reasonably complex custom electronic design you're going to get certified to sell as a product). Parasitic effects of traces, ESR, characteristic impedance, etc. are similarly problematic (people try to come up with stuff like springs or flexible tubes for characteristic impedance but again it's just more confusing in practice). So that rules out anything decently high speed digital (like, say, routing DDR3/4). That's of course not to mention RF, antennas, transmission lines etc. where all bets are off.

sandworm101 5y ago

>> 99.999% of practical applications of electricity All radio/wifi and everything involving fiber optics or magnets. That's probably slightly more than 00.001% of applications.

ionicgiraffe 5y ago
Not still a good analogy, but radiation can be seen as a consequence of vacuum not being empty from the perspective of an electric field (it has a very low permittivity, but it is not zero, so it is not empty of that property) even though it is empty of mass. If your water pipes are a bit porous and the medium on which your water pipes are was not air, but a very dense fluid, radiation emanating from the porous pipes would travel at the speed of sound through the medium, and could be detected without particles of water actually travelling through the dense fluid that constitutes the medium where your hydraulic circuit is submerged.

stephen_g 5y ago

I'm specifically talking electronics, where the usefulness runs out very quickly... As soon as you get to EMI/EMC there is no real liquid analogy (so that rules out basically any reasonably complex custom electronic design you're going to get certified to sell as a product). Parasitic effects of traces, ESR, characteristic impedance, etc. are similarly problematic (people try to come up with stuff like springs or flexible tubes for characteristic impedance but again it's just more confusing in practice). So that rules out anything decently high speed digital (like, say, routing DDR3/4). That's of course not to mention RF, antennas, transmission lines etc. where all bets are off.