4 ms·
But the RP2040 has no non-volatile storage, right? So you need to include a Flash chip in your cost estimates. It'll still be <$2, but it also means putting an
by piaway40495 5y ago
But the RP2040 has no non-volatile storage, right? So you need to include a Flash chip in your cost estimates.
It'll still be <$2, but it also means putting another chip on your board and routing around it. The old ESP32s worked that way too, but most people used the SoM "cans" when those chips were new because of the complexity in routing an antenna trace.
Personally, I'll wait for gen2 and pray for a simpler bootstrapping process for bare metal code.
- rckoepke 5y agoCorrect. To be pedantic, there is a built-in 16kB ROM starting at address 0x00000000 with RPi's open-source BootROM burned into it at the time the silicon is manufactured. There's no publicly-known way to write to this. It's technically "non-volatile storage", but it's not useful to anyone other than RaspberryPi/TSMC.
- lonjil 5y agoThere's no privately known way of writing to it either. Mask ROMs are set in stone.