7 ms·
Has always done a terrible job of selling itself. A $25 dtv receiver and a chickenwire antenna parabola and code your own satellite TV decoder, learn what radar
by ggm 5y ago
Has always done a terrible job of selling itself. A $25 dtv receiver and a chickenwire antenna parabola and code your own satellite TV decoder, learn what radar guns emit, emulate a modem... maybe even shift to IR and do TV controls.. it's, latent in this stuff.
But the frontpage doesn't take you there.
- szopa 5y agoWhat are some good resources to start playing with SD add an amateur?
- nereye 5y agohttps://pysdr.org/ https://pysdr.org/ is a good introduction to DSP/SDR using Python. Previous discussion on HN: https://news.ycombinator.com/item?id=24750588 https://news.ycombinator.com/item?id=24750588. Ham Radio Workbench podcast on GNU Radio: https://www.hamradioworkbench.com/podcast/GNU-Radio https://www.hamradioworkbench.com/podcast/GNU-Radio. In terms of hardware, there is a large spectrum, from inexpensive RTL-SDR (receive only, ~$25), PlutoSDR (transmit and receive, $229, which PySDR covers) all the way to $x000+ for USRP etc.
- Jenda_ 5y agoThere are also cheap SDR transmitters: https://osmocom.org/projects/osmo-fl2k/wiki https://osmocom.org/projects/osmo-fl2k/wiki (repurposing a USB-VGA dongle as analog source) https://github.com/F5OEO/rpitx https://github.com/F5OEO/rpitx (repurposing bitbang/PWM GPIO; we had weird problems with data corruption when we were trying to use it as a radio modem, but maybe you will have more luck) https://bellard.org/dvbt/ https://bellard.org/dvbt/ (repurposing standard VGA card, but it's probably not worth it since fl2k is way better) (beware that low quality of the transmitter usually means it will cause interference with other stuff. However, all of these have such a low power that if you will not use an amplifier, it will be OK, the interference will be probably undetectable outside of the room where the transmitter is)
- octagons 5y agoCheck out the Field Expedient SDR series. They offer a decent introduction for beginners.
- Jenda_ 5y agoI would suggest these two as a crashcourse to the math that is used in SDR: https://www.dsprelated.com/showarticle/192.php https://www.dsprelated.com/showarticle/192.php https://www.katjaas.nl/home/home.html https://www.katjaas.nl/home/home.html We are maintaining a long list with theory/math: https://brmlab.cz/event/dsp#zdroje https://brmlab.cz/event/dsp#zdroje , and engineering stuff: https://brmlab.cz/project/sdr/start#links https://brmlab.cz/project/sdr/start#links . However, I agree it is rather difficult to get into the topic. I'm playing with SDRs for almost 10 years (increasingly "fulltime" lately), and we still need to employ a professional mathematician to help me with some advanced problems.
- geenew 5y agoIs it possible to use a laptop's built-in wifi antenna / wifi card as the hardware side of a gnu radio setup? That seems like it would be a nice cheap one-two punch for getting started. AFAIR wifi uses the public (unregulated) bands so there should be lots of interesting stuff on those frequencies beyond wifi signals.
- RF_Savage 5y agoDue to it being a radio licenced by rule, the firmware in wifi devices is locked down tight. If it ware wide open FCC would revoke it's type acceptance. The only project that so far has managed to even partially use wifi hardware as a more generic SDR is nexmon[1] and even that is rather involved. Really cool project but not much heard since 2018. For just experimenting with modems across a noisy path one could just use the built in microphone and speakers. 1. https://github.com/seemoo-lab/mobisys2018_nexmon_software_defined_radio https://github.com/seemoo-lab/mobisys2018_nexmon_software_de...
- throway453sde 5y agoIf i run linux can i modify the firmware? Also the regulations differ from country to country so this should be legal in some of the country.
- Shared404 5y agoFirmware is typically loaded directly onto the hardware, so you would have to have a way to flash your custom firmware to the wifi antenna/card. In the US and other countries, it is to the best of my knowledge legal to modify firmware for hardware you own. The illegal part is broadcasting, most bandwidths are highly regulated. Listening on the other hand is mostly legal, or at the very least extremely likely to fly under the radar.
- RF_Savage 5y agoYou will not be able to modify the firmware blob just by running linux. Few years back there was danger of FCC de facto banning alternative router firmwares like openwrt to prevent tampering with the wifi cards firmware. This was the "only manufacturer signed firmware allowed" thing that thankfully was avoided. FCC's motivation in this is to prevent people from using too much power or certain frequencies. And as most manufacturers want to be able to sell in USA, it would have likely affected all versions. Kainda like how many wifi devices sold in Europe only go up to channel 11 on 2.4GHz, when the EU band goes up to channel 13. But ch12 and ch13 are not legal in usa, so they are blocked.
- superkuh 5y agoSure. That's because GNU Radio is for making the applications/flowgraphs. It is not an application you "use". It is an application for making applications. Give a newbie even the friendly GUI gnuradio-companion and they're not going to be able to do much without some serious time learning or existing DSP background.
- BenjiWiebe 5y agoRight. There isn't any way of making it easy or beginner friendly, because DSP and RF aren't simple topics.
- galangalalgol 5y agothat $25 dtv receiver only goes up to 2ghz so you can't get satellite tv without building a downconverter which isn't trivial or as cheap. Radar guns are even higher in frequency. It can only receive so you can emulate only the demodulation part of a modem. IR sounds like fun though. You could listen to tire pressure monitors too.
- n00p 5y agoan LNB (the thing that goes in the focus of a parabolic antena) is really cheap and easy to power the probem would be that the cheap dtv (RTL-SDR) only gets up to 2.4MHz of spectrum bandwith, a typical DVB-S mux can be around 20MHz or the DVB-T terrestrial standard, 8MHz
- galangalalgol 5y agoThe LNBs on ebay are pretty cheap but the intermediate frequency some of them use use is a bit too high. And as you say. You'd just be finding some slice of the signal without any hope of demodulation. I still think a microphone or rtl are a great way to play with gnuradio companion. Lime sdr is probably the next step up in price.
- wdfx 5y agoHow can the DVB-T signal bandwidth be larger than what the 'dtv' receiver is capable of if that device was actually originally designed to receive exactly that class of signal?
- mimanning 5y agoThe 2.8 MHz limitation comes from shipping raw RF samples off the device over USB 2. When operating as a DVB-T receiver the device decodes the signals before sending them over USB so it uses less bandwidth. The device was originally intended only as a dtv receiver and not a general purpose software defined radio. The hobbyist/ hacker community discovered the hidden debug mode that allows raw data acquisition and wrote drivers for it.
- 5y ago
- ganzuul 5y agoFor a little more investment you can get hacked version with a TCXO and it is able to receive almost 0 to IIRC 28MHz. It is a 2.8MHz spectrum analyzer although energy readings are not a feature. However cities are terribly noisy environments so loop antennas should work better for most people. Most amateur radio guides assume you are at least a homeowner but that is not realistic among people interested in a 20 eurodollar receiver.
- wdfx 5y agoFor about the same cost you can buy an sdrplay rsp clone which can receive from 0-2GHz with 10MHz bandwidth.
- brightball 5y agoI am always shocked that radio isn’t core science curriculum in high school at this point.
- spacecadet 5y ago100%
- yeetaccount4 5y agoHave you driven around town at noon? That’s when kids were getting out of school pre-pandemic. I just read this morning Kansas is so desperate for substitute teachers that they’ll take on teenagers without a single college credit. The public school system in many parts of the country is basically state funded daycare.
- aatharuv 5y agoAny chance this is at least partially deliberate? If more people were to use GNU Radio, the manufacturers of said hardware would get sued until they were forced to lock down their hardware.
- syedkarim 5y agoDo you mean manufacturers of RTLSDR devices? Those don’t need to be locked down (in the US), as they are receive-only devices.
- CamperBob2 5y agoTechnically, the ECPA is still on the books in the US, prohibiting devices that can receive the old 800 MHz AMPS cellular band. The ECPA was always a complete legal atrocity, and I don't think it's been enforced for many years, and cell phones no longer use NBFM or anything else that an unauthorized receiver can decode, but...
- erikbye 5y agoNot the github frontpage, no. But the actual homepage points you here: https://www.youtube.com/playlist?list=PLbBQHMnVMR41zZUZGF0bJArBXmpojtL9i https://www.youtube.com/playlist?list=PLbBQHMnVMR41zZUZGF0bJ...
- masto 5y agoI'm reasonably good at computers, and I even have a small understanding of electronics and radio, but I bought a HackRF One about 6 years ago, and every time I try to use this stuff I get hopelessly lost. Most of the time I can't even get the software running, or figure out which software I need to get running, and when I do I'm hopelessly lost. The only thing I ever managed was to listen to an FM radio station with a program that simplified the interface down to a frequency slider. I would love to do things like investigate how my water meter broadcasts its readings, but "latent" doesn't even begin to cover how inaccessible this stuff is. There are "tutorials", but they just say "Stick these parts together. There, now you have stuck these parts together!" (https://wiki.gnuradio.org/index.php/Simulation_example:_Narrowband_FM_transceiver https://wiki.gnuradio.org/index.php/Simulation_example:_Narr...) I know, open source, I should learn everything and then write better documentation.
- MrQuincle 5y agoI reverse engineered a so called social alarm a bit ago. You can find it here: https://github.com/mrquincle/social_alarm https://github.com/mrquincle/social_alarm Gnuradio was also new to me. However with two HackRFs I could do the entire thing. First replay attacks. Then trying to get the code by building up a set of processing blocks. Last synthesis of the complete signal. Very nice to do! Felt great!
- jancsika 5y agoYou should consider this a real treat-- it's like you're getting to travel back to the 90s open source scene for free. -Tom Sawyer