3 ms·
I looked briefly to try to find the ones I watched as intros, but couldn’t. I will say that I learned a lot by watching James at clough42 do some designs, but
by sokoloff 5y ago
I looked briefly to try to find the ones I watched as intros, but couldn’t.
I will say that I learned a lot by watching James at clough42 do some designs, but I think I’d learned the very basics before that.
Briefly, for functional parts: “blue lines on the sketch are bad” Add constraints until they turn black (fully constrained). If you aren’t sure why a line is blue, drag it and see which degree(s) of freedom it still has and add constraints to those.
Once you have that down and made a drawing, I’d then look at “modify user parameters” to make sketches more easily tweakable (especially if you’re 3D printing or trying to match a bolt pattern that’s somewhat “random”). Almost every drawing I start now starts with defining the user parameters (and then using those as the dimension entries).
This might not be the best “first video” to watch, but it’s topically relevant to help you here:
https://clough42.com/2020/07/04/tap-guide-block-ii-fusion-360-tips-from-viewers/ https://clough42.com/2020/07/04/tap-guide-block-ii-fusion-36...