3 ms·
I need to follow some better tutorials, apparently.
by cmrdporcupine 5y ago
I need to follow some better tutorials, apparently.
- sokoloff 5y agoI looked briefly to try to find the ones I watched as intros, but couldn’t. I will say that I learned a lot by watching James at clough42 do some designs, but I think I’d learned the very basics before that. Briefly, for functional parts: “blue lines on the sketch are bad” Add constraints until they turn black (fully constrained). If you aren’t sure why a line is blue, drag it and see which degree(s) of freedom it still has and add constraints to those. Once you have that down and made a drawing, I’d then look at “modify user parameters” to make sketches more easily tweakable (especially if you’re 3D printing or trying to match a bolt pattern that’s somewhat “random”). Almost every drawing I start now starts with defining the user parameters (and then using those as the dimension entries). This might not be the best “first video” to watch, but it’s topically relevant to help you here: https://clough42.com/2020/07/04/tap-guide-block-ii-fusion-360-tips-from-viewers/ https://clough42.com/2020/07/04/tap-guide-block-ii-fusion-36...
- code_biologist 5y agoI've found the Product Design Online's "Learn Autodesk Fusion 360 in 30 Days for Complete Beginners!" youtube playlist quite helpful -- though skip the intro videos to Day #1 if you already have experience: https://www.youtube.com/playlist?list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT- https://www.youtube.com/playlist?list=PLrZ2zKOtC_-DR2ZkMaK3Y... I use Fusion 360 exactly how you say you want to. Just slap some shit on there and then use dimensions and constraints to actually precisely position everything to match my measurements.
- abakker 5y agoI don’t want to judge here, but, as someone who was well versed in fabrication before I used fusion, I found the model of sketch/constrain/extrude to match well with what I do when I physically make things. It is well suited to the mindset that thinks about the manufacturing method while designing. Parametric modeling is a godsend for woodworking.