4 ms·
I can comment on the second portion of this issue- never run Cat cables in parallel with electric cable. You are forcing low voltage and high voltage cables to
by 404mm 5y ago
I can comment on the second portion of this issue- never run Cat cables in parallel with electric cable.
You are forcing low voltage and high voltage cables to share their electromagnetic field. That’s never a good thing. It can lead to unstable connection all the way to frying your Ethernet card.
- saxonww 5y agoGood news: he ran a 100ft cat6 cable so that he could plug in a wireless access point. His ethernet card should be fine.
- hamburglar 5y ago… but isn’t there still a risk to whatever devices are on both ends of that cat6? ie the access point and the head-end router or switch?
- amluto 5y agoForget the devices -- the risk is to people. If the insulation fails on the power cable and your network cable is insufficiently insulated, then your network cable could end up live. People generally avoid playing with hot power conductors, but no one takes any care to avoid touching network cables or, for that matter, the devices plugged in to network cables.
- dugmartin 5y agoIf they did short I think those tiny diameter wires in the cat6 would pretty much vaporize at household current.
- Tempest1981 5y agoImagine a short, so Cat6 is now at 120V. Then imagine someone repairing a Cat6 wall jack. Or a kid with a paper clip. Household current levels don't need to be flowing for it to be dangerous.
- amluto 5y agoOr just someone touching one end of a network cable. The pins on an 8P8C plug are not recessed very far.
- deleted 5y ago[deleted]