3 ms·
I grease all the threads on my bicycle ever since I had a bottom bracket seize into a frame and lost the frame. I have heard that you shouldn't grease lug nuts
by globular-toast 5y ago
I grease all the threads on my bicycle ever since I had a bottom bracket seize into a frame and lost the frame. I have heard that you shouldn't grease lug nuts on a car, though. I'm not sure why, so take it with a a large pinch of salt. It might be simply because most people don't regularly check the torque on the nuts and in that case it's more desirable to have them seize than fail.
- WalterBright 5y agoI've been doing this for 40 years. I've never had a lug nut loosen, or rust in place. But this, of course, is anecdotal data. Do what you judge is best for your situation.
- auxym 5y agoAnecdotally, I've been using loctite C5A (copper anti-seize) on lug nuts for years without an issue. I also torque them to the manufacturer spec with a torque wrench twice a year (when I switch summer/winter tires).
- WalterBright 5y agoI use hi temp wheel bearing grease for the lug nut lube, as it won't melt and run when hot. Don't want grease dripping on the brakes! The amount is also a tiny dab, half a drop is plenty. I don't use a torque wrench, just give em a hard twist, lower the tire to contact the ground, then twist them all again just to be sure.
- frosted-flakes 5y agoI think it's because torque specs for cars assume unlubricated threads. If you lubricate them and torque them to spec, you'll overtighten them.
- johnnyApplePRNG 5y agoHow does a torque wrench know the nuts are lubricated? Is 80 foot pounds of torque not 80 foot pounds of torque no matter the level of lubrication?
- alangibson 5y agoNo (sort of). You're not looking for torque, you're looking for tension on the bolt as it stretches. Torque is just a proxy To tension on lubed and unlubed bolts will be different at 80 ft-lbs due to friction loses.
- WalterBright 5y agoMany bolts have a lubed spec and a dry spec. The dry one is, of course, completely unreliable. If it is lubed and ain't turning smoothly, take it out and clean the threads. Or get a better grade of bolts.
- euroderf 5y agoIf you live up north, every autumn take off every lug nut on every car wheel, and one at a time oil it and put it back on. You'll thank yourself when you're caught with a flat in freezing cold and howling winter winds.