3 ms·
All materials have problems with fusion neutrons. The neutrons from DT fusion are sufficiently energetic to cause (n,alpha) and (n,p) reactions, causing hydrog
by pfdietz 5y ago
All materials have problems with fusion neutrons. The neutrons from DT fusion are sufficiently energetic to cause (n,alpha) and (n,p) reactions, causing hydrogen and helium gas to accumulate. Helium in particular is a problem, because it collects into tiny very high pressure bubbles that rip the material apart from the inside. Simple elastic scattering of neutrons off the atoms cause them to scatter many atomic diameters in the material, scrambling its crystalline structure.
There are also just a few elements that do not produce unacceptably long lived radioisotopes under fusion neutron bombardment. This greatly limits the choice of elements from which to make the reactor structure. Right now, the best choice is RAFM steel, but it has a number of serious drawbacks.
- mlindner 5y agoLate response, hopefully you see the comment, but you seem to be assuming a solid material. If the material is a liquid, why are hydrogen and helium gas a problem?
- randmeerkat 5y agoWhat are the serious drawbacks?
- pfdietz 5y agoThe lifetime (in displacements per atom) of RAFM steel still isn't that great. Moreover, after some irradiation, the material becomes brittle unless hot. The temperature window (300 to 550 C) between where the material becomes sufficiently ductile, and the upper temperature where the material undergoes creep, is rather small. The upper temperature isn't that high, either, which makes high temperature blanket concepts harder to design. RAFM steel is also ferromagnetic, which interferes with the design of the reactor.
- Natsu 5y agoYou can find a lot of info on material selection in this PDF: https://gcep.stanford.edu/pdfs/qa4ScQIicx-kve2pX9D7Yg/baluc_fusion_05_06.pdf https://gcep.stanford.edu/pdfs/qa4ScQIicx-kve2pX9D7Yg/baluc_...