Right now i run my homelab on consumer hardware in addition to my cloud VPSes. Due to me not having that much free space and also enjoying a good night's sleep

Right now i run my homelab on consumer hardware in addition to my cloud VPSes. Due to me not having that much free space and also enjoying a good night's sleep, i have cron set up to put the servers offline (rtcwake) while i'm sleeping, so that they wouldn't just go on droning in the background and to start up in the morning. Since they do this every day with no exceptions, that's a decent amount of power cycling, in addition to them working all the time otherwise, which has been going on for about 5 years or so. So essentially each of them has been on for about 30'000 - 35'000 hours and has power cycled around 1800 - 3600 times, because for the longest time i've had a cron restart set up right after the rtcwake sleep period finishes, due to some odd bug in the kernel that otherwise caused their CPUs to get stuck at 100% usage after waking up. Over these 5 or so years, i've had: - 2 PSUs die (possibly one due to a power surge though, before i had UPSes in front of them), seemed to work fine but then one morning didn't start up - 2 HDDs die (Seagate Barracuda 1 TBs, each box has 2-3 of them), typically this isn't abrupt, but the HDDs lose power when trying to spin up and loop like that for a while before eventually deciding to work, before eventually not being able to do that anymore at all; oddly enough, Clonezilla could still mirror such a disk after a few attempts - 1 motherboard die (not sure precisely why, then again, for a while in my university i had the servers (without cases) up next to a slighty ajar window, even in winter as well as in summer, while they were otherwise only passively cooled (x86, but 35W TDP 200 GEs) - some problems with bearings, once in a cheap CPU fan before i had passive cooling and then again in one of the current PSU fans, sometimes when starting up it sounds like a miniature chainsaw (checked the fan, isn't actually seized up or anything, just cheap bearings) - some problems with the power button (well, more like the pins, since i didn't have a proper button at one point, just a screwdriver to close the circuit with), though i solved that by closing the circuit on the ATX connector itself by putting a little wire in there All of the failures have happened around power cycling, never in the middle of otherwise normal operation. To my surprise, nothing has actually melted or caught fire, the last time when anything close to that happened was ages ago with my 9800 GT GPU which for some reason started getting really bad thermals (90 degrees C) and so i had to reflow solder it in the oven a few times, before eventually it just refused to work and artifacted out on boot. Or maybe i could mention a MOLEX connector stopping working, but i might just have a splitter in there due to not enough SATA connections from the PSU, something that people typically advise against. So, to sum all of that up, yes, consumer hardware will definitely die from regular use under normal circumstances, probably moreso with regular power cycling of parts that aren't really made for that (especially the regular HDDs, which seemed to die right after restarts). Also, my case might be an outlier (and a sample size of 1), due to me not caring that much in university about keeping the servers in a good environment, but i bet that most consumer hardware has to deal with sub-optimal conditions in one way or another - accumulation of dust, bad airflow, air humidity, ambient temperature and power grid fluctuations all should also be taken into account. I actually had to stagger the startup times for my servers, since otherwise they'd max out their power draw at the same time in the morning (e.g. when launching Docker containers and spinning up VMs), which also lead to some weirdness. Of course, the quality of the parts themselves probably also matters (like a reputable brand PSU vs the cheaper options that i could afford) as much as how they're used (prolonged periods of full load while everything starts up), as do other factors, like vibrations of the HDDs, for example.