3 ms·

DDR4-3200 is an expensive boutique product. Drop the speed requirement a little and you'll find the pricing is in line with my comment.

by bcrl 5y ago

boardwaalk 5y ago
DDR4-3200 is already fairly slow for a new system -- DDR4-3600 f.e. aligns with the 1800 MHz Fabric Clock in Ryzen 3 and makes a not insubstantial difference in performance, and (non-ECC-wise) is not expensive. I have a feeling the cost is not just a money-wise 5-10%.
- bcrl 5y ago
  Amazon currently lists the 32GB Nemix DDR4-2666 UDIMM for $169.99 while a non-ECC UDIMM is $129.99. So you're right, at $40 it is closer to a 30% premium right now. But that one time cost of $40 per DIMM is worth it if it even saves me 10-15 minutes of time debugging. And I'm willing to pay that small cost adder on every new machine I get, because I have the battle scars that have pro It's not like I'm dealing with hundreds of systems, this is across maybe 2 or 3 dozen machines over the past 30 years.ven it's a worthwhile tradeoff. The battle scars are as follows: - The 2MB expansion card on my Amiga 500 turned out to have a couple of bad bits, and because I was a green techie back then, I just attributed it to general software instability. Years later a RAM test showed there was a problem. Sadly there were no memory test utilities shipped with Amigas back then. - My first 486 system had a bad bank in the SRAM on the motherboard. Took years to figure out as it only really hit when heavy DMA occurred from a VLB SCSI card while the CPU was heavily loaded. Swapped the SRAM out and it was stable for a few more years of service. - One of my K6 systems had a DIMM go bad. At least it failed badly enough that the system couldn't boot. - I've had an Intel Xeon in a colocated server start throwing ECC errors in the L3 cache. Replaced and RMAed the CPU before it caused an outage. - One system started throwing ECC errors because the power supply was marginal. Now, please, show me how the extra cost of ECC is worthless to you when things like this happen in the Real World. Is your time spent debugging hardware failures really not worth the cost of ECC?
deckard1 5y ago
Thanks for the downvotes, folks. Really. > DDR4-3200 is an expensive boutique product. You have to be fucking kidding me. On a desktop Ryzen?? Most desktop PC builders are gamers. That's just a fact. They drive the market. That's why every motherboard looks like a gamery stealth bomber. Outside of Asrock Rack and one or two Asus Pro boards, there is simply nothing out there that matches what the server world is seeing with SuperMicro. I have 1x32GB DDR4-3200 UDIMM ECC on my Ryzen. But I have no delusions about the cost. It was expensive as fuck compared to non-ECC RAM.
- formerly_proven 5y ago
  (And there's no way to get ECC memory with decent timings because DDR4 is binned to death, so even if you found some hypothetical Samsung B-die ECC SKUs they'd be like 2333 or 2666 MHz and you'll never get them to work at 3200 or 3600 with timings better than 80-80-80-10000 or so. Meanwhile 3200CL14 or 3600CL16 is pretty usual without ECC. edit: On a second look, Mushkin will actually sell you 3200 CL14 ECC memory... 14-18-18-38 that is. At almost 10 quid on the gigabyte. Meanwhile you can get real CL14 non-ECC memory at around half that.

DDR4-3200 is an expensive boutique product. Drop the speed requirement a little and you'll find the pricing is in line with my comment.

by bcrl 5y ago

DDR4-3200 is an expensive boutique product. Drop the speed requirement a little and you'll find the pricing is in line with my comment.

boardwaalk 5y ago

DDR4-3200 is already fairly slow for a new system -- DDR4-3600 f.e. aligns with the 1800 MHz Fabric Clock in Ryzen 3 and makes a not insubstantial difference in performance, and (non-ECC-wise) is not expensive. I have a feeling the cost is not just a money-wise 5-10%.

bcrl 5y ago
Amazon currently lists the 32GB Nemix DDR4-2666 UDIMM for $169.99 while a non-ECC UDIMM is $129.99. So you're right, at $40 it is closer to a 30% premium right now. But that one time cost of $40 per DIMM is worth it if it even saves me 10-15 minutes of time debugging. And I'm willing to pay that small cost adder on every new machine I get, because I have the battle scars that have pro It's not like I'm dealing with hundreds of systems, this is across maybe 2 or 3 dozen machines over the past 30 years.ven it's a worthwhile tradeoff. The battle scars are as follows: - The 2MB expansion card on my Amiga 500 turned out to have a couple of bad bits, and because I was a green techie back then, I just attributed it to general software instability. Years later a RAM test showed there was a problem. Sadly there were no memory test utilities shipped with Amigas back then. - My first 486 system had a bad bank in the SRAM on the motherboard. Took years to figure out as it only really hit when heavy DMA occurred from a VLB SCSI card while the CPU was heavily loaded. Swapped the SRAM out and it was stable for a few more years of service. - One of my K6 systems had a DIMM go bad. At least it failed badly enough that the system couldn't boot. - I've had an Intel Xeon in a colocated server start throwing ECC errors in the L3 cache. Replaced and RMAed the CPU before it caused an outage. - One system started throwing ECC errors because the power supply was marginal. Now, please, show me how the extra cost of ECC is worthless to you when things like this happen in the Real World. Is your time spent debugging hardware failures really not worth the cost of ECC?

deckard1 5y ago

Thanks for the downvotes, folks. Really. > DDR4-3200 is an expensive boutique product. You have to be fucking kidding me. On a desktop Ryzen?? Most desktop PC builders are gamers. That's just a fact. They drive the market. That's why every motherboard looks like a gamery stealth bomber. Outside of Asrock Rack and one or two Asus Pro boards, there is simply nothing out there that matches what the server world is seeing with SuperMicro. I have 1x32GB DDR4-3200 UDIMM ECC on my Ryzen. But I have no delusions about the cost. It was expensive as fuck compared to non-ECC RAM.

formerly_proven 5y ago
(And there's no way to get ECC memory with decent timings because DDR4 is binned to death, so even if you found some hypothetical Samsung B-die ECC SKUs they'd be like 2333 or 2666 MHz and you'll never get them to work at 3200 or 3600 with timings better than 80-80-80-10000 or so. Meanwhile 3200CL14 or 3600CL16 is pretty usual without ECC. edit: On a second look, Mushkin will actually sell you 3200 CL14 ECC memory... 14-18-18-38 that is. At almost 10 quid on the gigabyte. Meanwhile you can get real CL14 non-ECC memory at around half that.