5 ms·
Euro Modules
- OJFord 5y agoI'm submitting this after the 'Museum of plugs and sockets' discussion reminded me of them - I think they're absolutely fantastic, but I've never tracked down if there's an actual standard, or it's just a de facto standard. (They are pan-manufacturer.) The short of it is that you buy a faceplate (1U/2U/3U/4U etc., multi-row) in whatever design you want, and then fit modular pieces of 1U/2U width to build whatever sockets you want. Brilliant. Afaik only available in Europe. Would love a link/reference to standard if someone knows there is one.
- seszett 5y agoIt's common enough but in practice, using the faceplate of one manufacturer with the switches of another one (and often, even another range of the same manufacturer) never looks good. In fact I think that the very example in this page, at the bottom, with a silver faceplate and plain white modules, shows it quite well.
- salex89 5y agoI'm also not sure, and interested. Sometimes modules fit together, sometimes not. However, there are nicer examples of this concept. My personal favorite, with an online switch configurator: https://www.tem-si.com/ https://www.tem-si.com/ I love this setups because you can easily retrofit a switch with a motion sensor, not needing to drill new holes or add cables.
- pulse7 5y agoI have those in my house. They are modular (see https://www.tem-si.com/design-switches/ https://www.tem-si.com/design-switches/).
- OJFord 5y agoYes, I struggled to know what to link really - ideally it would be the spec, if only I knew there was one and where to find it! No Wikipedia page on them even. I've upvoted someone's question on a StackExchange site in the past asking for a standard, and I think accidentally opened a duplicate a year later or something myself: https://diy.stackexchange.com/questions/177403/euro-modules-is-there-an-actual-standard-for-them-or-are-they-just-a-de-facto https://diy.stackexchange.com/questions/177403/euro-modules-... Anyway, I ended up with this link just because I thought it made the modular concept quite clear; not endorsing theirs specifically. My faceplates and modules are from different manufacturers, many of the modules unmarked generics.
- zwp 5y agoLeGrand's Mosaic range is very similar. I would also be interested to know if there is a standard (although I suspect not). https://www.legrand.fr/catalogue/interrupteurs-et-prises/mosaic https://www.legrand.fr/catalogue/interrupteurs-et-prises/mos... It's a cute idea but Mosaic is quite expensive. Also, you still must take into account safety regulations eg adequately separating low and high voltage wiring behind the faceplate.
- bayindirh 5y agoA lot of companies build these types of systems in Europe. We have Vi-Ko (recently sold to Panasonic) and other local manufacturers which sell similar systems.
- kuschku 5y agoI’m more used to modular sockets/faceplates, but with a small strip of separation between each socket/switch. Personally, I’m using https://www.berker.com/de/e-katalog/schalterprogramme-und-gebaeudesteuerung/designlinien/berker-s.1/345193.htm https://www.berker.com/de/e-katalog/schalterprogramme-und-ge... in my apartment. Previously Gira switches/sockets were installed, which are sadly just slightly out of spec.
- fy20 5y agoThis isn't a European standard, I believe it originally came from Germany and a lot of other countries followed suite. In these countries the electrical installation boxes are usually circular with a 60mm spacing between mounting screws [1]. Compared to the UK which uses square boxes and US which has rectangular boxes, this is probably because walls in Europe are usually made from masonry (and often concrete) and it's much easier to drill a round hole than a square hole. The boxes themselves are plastic. If you want multiple you can just place multiple single units next to each other, or you can get installation boxes that are multiple units too. I believe one of the first companies to come out with the idea of mounting them in multiple 'units' was Gira with their "System 55" line. [2] The switch / socket / dimmer / whatever, called an insert, goes into the installation box and usually screws in with at least two screws. The part that is exposed is usually 55mm (hence the name), and a frame fits snugly over the top, covering the screws. It's worth noting that this isn't a standard, and they are not always interchangable between manufacturers - for example the spacing between frame may be slightly different. In my apartment for some reason the electrician decided to use a different manufacturer for some switches, and they often catch on the frame and aren't as smooth to operate. The frame just snaps in place over the top, so often it's tricky to get all the inserts aligned properly for it to fit correctly. When you buy them from a hardware store you buy the insert and the face plate seperately. There's usually a few different colours to choose from, in my country the hardware stores sell white, ivory and anthracite, but if you go to a specialist electrical retailer they will have more to choose from. For example Busch-Jaeger has over 10 different designs to choose from [3]. Some manufacturers even sell the switch plates - the bit you touch - seperately from the insert. This makes more sense if you think about commercial installations, where you may have different printed symbols on the plates, but behind it's all the same. It's also worth mentioning that the inserts are not just limited to switches or sockets, you can get heating controllers, radios, motion sensors, smart home controllers, etc [4]. [1] https://www.lichted.de/led/montageanleitung-zum-einbau-von-unterputzdosen-steckdosen-und-schalter/ https://www.lichted.de/led/montageanleitung-zum-einbau-von-u... [2] https://www.gira.com/en/en/inspirations/systems/gira-system-55 https://www.gira.com/en/en/inspirations/systems/gira-system-... [3] https://www.busch-jaeger.de/en/products/switch-designs https://www.busch-jaeger.de/en/products/switch-designs [4] https://www.jung.de/en/623/products/technology/ https://www.jung.de/en/623/products/technology/
- deleted 5y ago[deleted]
- SkeuomorphicBee 5y agoI don't get what is the point of this submission? Just looks like a brand of regular sockets. Is it about the modularity of the socket? Is this somehow a "new" concept for people in the North America or Europe? If yes, than that is really strange type of exceptionalism, here in Brazil modularity has been the standard for almost 30 years, you just buy the shields (with 1,2,3,4,or 6 slots) and whatever modules you want (light switches, power sockets, telecom sockets, etc). You would actually find it hard to find a non-modular socket in a hardware store.
- petercooper 5y agoI also find it an unusual submission, but here in the UK I am unfamiliar with modularity for wall sockets. They usually come as single integrated units even if they have things like USB added. The UK has very (re)strict(ive) electrical standards though. Here's an example of the style of perhaps 95%+ of sockets you'd see in UK homes nowadays: https://www.diy.com/departments/electrical-security/switches-dimmers-sockets/sockets/DIY579414.cat https://www.diy.com/departments/electrical-security/switches...
- navaati 5y agoThat mandatory switch, oh, Britain...
- pmyteh 5y agoNot mandatory, as it turns out - just ubiquitous. You can get similar sockets with no switch if you want them never to be turned off: https://www.edwardes.co.uk/products/mk-k781whi-2-gang-13-amp-un-switched-white-socket-outlet https://www.edwardes.co.uk/products/mk-k781whi-2-gang-13-amp...
- petercooper 5y ago230V though.. I don't know the reality, but I was brought up with them enough to feel unsafe just pulling out (or putting in) a plug without using the switch first :-D
- jaclaz 5y agoOnly for the record, in Italy the modularity is a de facto standard since some 40 years +. When you build a new house the initial question is only whether and where you want "503" or "504" boxes in the walls, they are corresponding to 3 modules and 4 modules and are ubiquitous, much later you may decide which make/model of switches, sockets etc. to populate them. The Italian sockets are 1 module, Din/Schuko are 2 modules, switches and push buttons, etc. are 1 module. Till a few years ago you only used 503's, nowadays the trend is towards 504's, at least on the "low" boxes (where you normally have sockets). There are 4 or 5 reknown manufacturers, each with more than one "series" of switches/sockets/etc. with different designs. Some few more details about sockets: https://news.ycombinator.com/item?id=27652337 https://news.ycombinator.com/item?id=27652337