3 ms·
This is called brownout detection, and it's a common feature even on low-end microcontrollers. As the other commenter says, it's derivable from a bandgap refere
by pjc50 5y ago
This is called brownout detection, and it's a common feature even on low-end microcontrollers. As the other commenter says, it's derivable from a bandgap reference.
In re "properly secured system": it's a cost-sensitive games console for children, while there's a big incentive against piracy ultimately there's a limit to how much you can defend. And this is the second line of defense, the bootloader having been breached earlier.
- baybal2 5y agoBandgap reference can't tell anything about body bias voltage, unless it itself built on top of insulator
- pjc50 5y agoCould you elaborate? Isn't the substrate usually tied to ground so we can ignore it in modelling? Or are you saying that it could be floated separately to ground in order to attack the chip?
- baybal2 5y agoYes, and normally it is. I think on every moderately modern CMOS IC, body bias is controlled. > What is body bias? > Body bias is used to dynamically adjust the threshold voltage (Vt) of a CMOS transistor. While CMOS transistors are usually thought of as having three terminal devices, with terminals for the source, gate, and drain, it’s increasingly common to have a fourth terminal connected to the body (substrate). Because the voltage difference between the source voltage (Vs) and body voltage (Vb) affects the Vt, the body can be thought of as a second gate that helps determine how a transistor turns on and off. https://semiengineering.com/body-bias-what-it-is-and-why-you-should-care/ https://semiengineering.com/body-bias-what-it-is-and-why-you...
- floatboth 5y agoThe whole "games console" context also comes waaaay after the chip was made — it's not a custom for-Nintendo chip! tegra210 was previously used in the Nvidia Shield 2015, then the Google Pixel C (also from 2015) and the Jetson TX1 dev board.