4 ms·
Open IP over VHF/UHF Part 5
- th0ma5 5y agoIn the US there's a maximum symbol rate? I guess I thought that'd apply. 1.2 kbps perhaps? My Google foo is failing me.
- dbcurtis 5y agoI believe those regulations have changed.
- wmf 5y agohttps://ham.stackexchange.com/questions/10556/do-fcc-regulations-limit-digital-data-rate https://ham.stackexchange.com/questions/10556/do-fcc-regulat...
- can16358p 5y agoNot an electronics expert here, sorry if it doesn't make sense but why is there a limit on symbol rate anyway? I understand tx power limits to avoid interference, but why an additional symbol rate limit too?
- OJFord 5y agoAnti-encryption I believe, keeping the barrier for receiving low.
- kmbfjr 5y agoBecause it is a shared resource. It is limited not to exceed the bandwidth of a “typical” SSB transmission. Typical is in quotes because some people think it is cool to allow their radios to transmit up to 10KHz bandwidth because “high fidelity SSB” is apparently a thing.
- NovemberWhiskey 5y agoThe symbol rate is ultimately linked to the amount of bandwidth a signal uses, i.e. the amount of the radio spectrum that's used by a signal, rather than the physical area over which that spectrum is used (which relates to power).
- squarefoot 5y agoVery interesting, and being the same guy beyond Codec2 it inspires some applications such as audio and data link so that two or more people could communicate, albeit on a traditional simplex channel, while also sharing data from various sensors. That would be trivial using WiFi, but to make it useful it should use illegal power levels.
- drmpeg 5y agoHere's my 30 Mbps IP over UHF/SHF system. It takes advantage of a little known driver in the Linux media subsystem that exposes the RF link as just another Ethernet interface. Although not shown in the diagram, it also works with IPv6. Of course, it's a lot more expensive to implement than the article system (and I used some Cadillac components in the test bed). Someday (when the parts shortage is over), I may productize it. https://www.w6rz.net/ofdm3.png https://www.w6rz.net/ofdm3.png https://github.com/torvalds/linux/blob/master/drivers/media/dvb-core/dvb_net.c https://github.com/torvalds/linux/blob/master/drivers/media/...
- mercora 5y agoi wonder if i am allowed to transmit such signals, maybe with some ham license? also, i read "exposes the RF link as just another Ethernet interface" a little wrong. its not like this will demodulate ethernet somehow but extracts frames from the transport stream using usual DVB mechanisms (i.e referencing the data stream in the PAT and similars) or am i wrong?
- drmpeg 5y agoThose frequencies that I'm using (2305 and 3429 MHz) are in amateur radio allocations, so a license would be required (entry level Technician license will do). Because of that, you can't run any encrypted traffic over the link. So no https, ssh, etc. allowed. With a license, you could transmit with up to 1500 watts (although it would not be easy). But you could easily run considerably more power than WiFi (like 10 to 20 watts). Yes, I definitely simplified the explanation of the functionality of the driver. It's really a ULE (Unidirectional Lightweight Encapsulation) protocol driver. It processes Transport Stream packets received from the DVB-T2 receiver on a selected PID and forwards the data payload (IP packets) over the Linux Ethernet interface. On the transmit side, I implemented the ULE protocol in GNU Radio (Github link in the diagram). To make the interface bidirectional, I capture transmit packets sent to the interface with libpcap as part of the encapsulation process. https://en.wikipedia.org/wiki/Unidirectional_Lightweight_Encapsulation https://en.wikipedia.org/wiki/Unidirectional_Lightweight_Enc... https://tools.ietf.org/html/rfc4326 https://tools.ietf.org/html/rfc4326
- hansor 5y agoWhy can't we just use TCP over AX.25? This "problem" (TCP over HF/VHF) has been solved around 1979(sic!). - https://en.wikipedia.org/wiki/KISS_(TNC) https://en.wikipedia.org/wiki/KISS_(TNC) - https://en.wikipedia.org/wiki/Packet_radio https://en.wikipedia.org/wiki/Packet_radio
- detaro 5y agoTechnology has evolved since 1979, modern encodings can get a lot better numbers than what was possible back then. And amateur radio is at least nominally about experimentation, not "only do the same thing we did 40 years ago and question everything newer" or "but somebody else is already working on this".
- ajsnigrutin 5y agoYep, and even all of the problems with these, have been solved with new protocols and megabit speeds over long distances: http://lea.hamradio.si/~s53mv/nbp/nbp.html http://lea.hamradio.si/~s53mv/nbp/nbp.html http://lea.hamradio.si/~s53mv/nbp/new.html http://lea.hamradio.si/~s53mv/nbp/new.html (10mbits over ~100km)
- anthk 5y agoDoes it need a license?
- ajsnigrutin 5y agoYes, you need a ham licence to transmit in those bands (also for the bands in the original article)
- anthk 5y agoWerent UHF freqs license free because of DVB-T adoption? At least in a good chunk of Europe...
- 5y ago
- geeB 5y agoNice project! Can something like this in practice be used with HAM radio via some loophole, or it's basically impossible to use a large fraction of commonly used protocols/payloads (https, ssh, any secured protocols, VPNs, etc) due to encryption not being allowed? I suppose you could argue that the intention is not to obscure the communication, but it seems pretty flimsy.
- mortenlarsen 5y agoIn some places (including Denmark) encryption is allowed as long as the signal is somehow identifiable (includes your call sign or DMR ID). I know that some use WiFi outside normal bands (3.3–3.8 GHz) and simply set the SSID to their call sign. This is called HSMR. https://en.wikipedia.org/wiki/High-speed_multimedia_radio https://en.wikipedia.org/wiki/High-speed_multimedia_radio