3 ms·
> hammer drills can work if the bit is small and the mix used more sand and maybe fine gravel (eg. mortar or brick), but are hopeless if you encounter a larger
by bayindirh 5y ago
> hammer drills can work if the bit is small and the mix used more sand and maybe fine gravel (eg. mortar or brick), but are hopeless if you encounter a larger stone. Importantly, the energy and the frequency of the hammering action are tied to the rotation - usually 1, 2, or 3 taps per revolution. You don't get heavy or rapid impacts at low RPM.
Hrmm, no.
The drill I use (the 800W one) can drill up to 20mm on concrete. It taps probably 20-30 times per revolution and is able to drill earthquake resistant concrete with ease. It also taps harder if you push harder. This kind of concrete can resist thick steel nails when driven with an hammer. The nails generally break into two or get slightly bent.
When used with a good drill bit, it just drills very cleanly with a little bit of resistance in the beginning, but makes relatively quick work of it.
For reference, it's a Bosch CSB 800-2 RE, made in the 90s [0].
So, there are hammer drills, and there are hammer drills. Not all of them are created equal.
[0]: https://obrazki.elektroda.pl/9414321300_1470304831.jpg https://obrazki.elektroda.pl/9414321300_1470304831.jpg