3 ms·

Basically this list of known working adapters is your best bet: https://jamesachambers.com/raspberry-pi-4-usb-boot-config-guide-for-ssd-flash-drives/ https://ja

Basically this list of known working adapters is your best bet: https://jamesachambers.com/raspberry-pi-4-usb-boot-config-guide-for-ssd-flash-drives/ https://jamesachambers.com/raspberry-pi-4-usb-boot-config-gu... You can technically just disable UAS like you said, but you'll likely lose some drive performance. But if filesystem corruption is a concern then you're probably safer disabling it.

scottlamb 5y ago
I don't think that list is good enough. I've had adapters work fine for months with UAS and then have errors. I went through a few rounds of that, disabled UAS, and haven't had problems with the same adapters for a couple years since. So I believe there are adapters out there that more or less work with UAS on Linux but under some infrequent condition (likely load-related) cause these sorts of errors. So a table of "Known Working Adapters" with notes like "Reported as working with UASP support by pierro78 in the comments" doesn't address my concern.