3 ms·
I had hollow / drywall walls in my old house (it was an older house that had an extra layer built inwards, if that makes any sense), and figuring out what to us
by Cthulhu_ 5y ago
I had hollow / drywall walls in my old house (it was an older house that had an extra layer built inwards, if that makes any sense), and figuring out what to use was a bit of a pain. But, I managed to hang up some pretty heavy stuff on there.
The one thing was a kitchen cabinet with a fold-out door that would carry all my plates and the like - 30+ kilos? Up to 50? And since it's ikea stuff, it only needed two screws at the top!
I tried plugs that look like the self-drilling anchors described in the article, they ended up taking out a big chunk of the wall, whoops. We settled on the plastic butterfly anchors (number 1 on the picture), which held up just fine - but I did live in constant fear that the wall would give in.
- omnimus 5y agoWatch out for this. We had badly installed top cabinets loaded with plates and glasses. Its been fine for years. One night i wake up to sounds of apocalypse... Cabinets falling one by one breaking everything inside. Just like some controlled demolition. Plates and glasses can be quite expensive :((
- shellfishgene 5y agoSurely no one installs cabinets with just screwing into the drywall and not into the studs, or some other more solid part?
- magicalhippo 5y agoThat assumes the cabinets and studs line up. Previous place we were not so lucky when redecorating our kitchen. We used quality anchors as well as placing an extra horizontal wooden "beam" below the cabinets for them to rest on, to minimize any vertical load on the anchors. The beam we could easily attach to the studs. Held up for the years we lived there, even with lots of plates and such.
- jessaustin 5y agoThis seems insane to me. Any cabinet wider than 16" (or in extreme cases 24") is going to overlap with at least one stud. Why not screw into that stud? Any wood cabinet has a perfectly usable cross-piece for that purpose at both the top and bottom. If the cabinet is narrower than 16" I suppose you could chance it but I'd prefer to just move it sideways until it overlapped a stud.
- deleted 5y ago[deleted]
- magicalhippo 5y agoThe IKEA cabinets have a flimsy back, it's the sides that take the load. And moving sideways would have meant giving up a cabinet, not ideal in a small kitchen. I see IKEA has improved their design now, with the cabinets hanging from a metal bar of sorts, which can be mounted to the studs. Guess there's a reason for that...
- jessaustin 5y agoOh wow. I'm surprised it's legal to sell a box like that under the name "cabinet". This is a product that has had a standard, functional form for centuries.
- macNchz 5y agoOne would hope, but I think it’s not uncommon to have them installed incorrectly. It happened to a friend of mine a few years ago, and a search turns up plenty of other instances: https://duckduckgo.com/?q=kitchen+cabinets+fell+off+wall&t=iphone&iax=images&ia=images https://duckduckgo.com/?q=kitchen+cabinets+fell+off+wall&t=i...
- conductr 5y agoI’m never surprised by the incompetence or laziness people, even “pros”, do to unseen parts of construction. Many times they know it will work long enough to be someone else’s problem, which is quite unfortunate. I see the same with tile. Installers skipping waterproofing is quite common. DIY folks trying to make it look pretty so they can sell the home for top dollar, etc. It often creates a much bigger problem for the next person to deal with.
- TorKlingberg 5y agoIf you are hanging Ikea cabinets they also sell long metal rails that the cabinets can hang on instead of the two screws. Then you can screw where the beams are, or just put a lot of anchors. You walls need to be fairly straight though. https://www.ikea.com/gb/en/p/metod-suspension-rail-galvanised-60205664/ https://www.ikea.com/gb/en/p/metod-suspension-rail-galvanise...