2 ms·
Are those staples expanding or serrated or something? And how deep do they go? I wouldn't put up a TV with those myself, the one I have now is attached with eig
by Cthulhu_ 5y ago
Are those staples expanding or serrated or something? And how deep do they go? I wouldn't put up a TV with those myself, the one I have now is attached with eight bolts going in err, over 5 cm deep into solid concrete walls.
Of course the TV itself is hanging on the bracket with just two bolts, held down with gravity and some thin metal wire retainers. It wobbles when touched.
- 8note 5y agoI think your main worry is breaking the drywall/changing the angle, rather than the staples pulling out or shearing off. It's not like TVs are very heavy, and the weight adds to the friction forces holding the staples in. Especially if the staple has to pull upwards to be removed, it's unlikely to be going anywhere unless the material falls out from under it
- aikinai 5y agoThey're regular, small staples not going in particularly deep, but the aggregate friction is enough to hold it very firmly. Here's a video of a guy pulling on it so hard his (admittedly thin) wall flexes[0]. I forgot if it was this video or another one; I've seen someone hanging from it to test the strength. [0] https://youtu.be/uYYhNf9GVZY?t=469 https://youtu.be/uYYhNf9GVZY?t=469
- onion2k 5y agoWhen you're mounting something the important thing is that the stress is distributed across the mounts in a way that means no single component is receiving more weight than it can take. Using lots and lots of 'weak' mounts like staples is just as secure as using eight bolts, but in the case of the staples the load is distributed across more of the wall. If the wall itself is the weak point then that's more secure.