3 ms·
Still overkill, Commander Pro uses $10 8051 8-Bit 50MHz with 64KB flash and 8KB ram. CY8C3246AXI-138 https://www.cypress.com/part/cy8c3246axi-138 https://www.c
by rasz 5y ago
Still overkill, Commander Pro uses $10 8051 8-Bit 50MHz with 64KB flash and 8KB ram.
CY8C3246AXI-138 https://www.cypress.com/part/cy8c3246axi-138 https://www.cypress.com/part/cy8c3246axi-138
- voxadam 5y agoCY8C32xxx processors are based around the 8051 but they're actually part of the fairly capable Cypress PSoC 3 line[1]. The PSoC 3 includes an 8501 compatible processor along with a bunch of mixed signal peripherals and a PLD fabric to connect it all. [1] https://www.cypress.com/products/psoc-3 https://www.cypress.com/products/psoc-3
- formerly_proven 5y agoAnd even a 7$/ku MCU is complete overkill (assuming that's the real price, not shortage-related, though its lead time is over a year, so the price is probably inflated), because literally any microcontroller with an ADC can easily do this. Around ten years ago I built my own on a tiny AVR, and even that would be an expensive option compared to what you could use instead in a commercial product (<0.5 $/ku ARM MCUs). I haven't had a fan controller for many years though, because they're quite pointless if you do things right.
- rasz 5y agoCY8C3246 used to be $5-3.75. Cypress chips were always expensive. Ever since I saw them they always cost as much as separate mcu + separate CPLD.
- intpx 5y agoStill overkill. A 555IC, a variable resistor, a thermistor and a few passives is all you need. You could get the BOM for the whole #! down to under a buck.