4 ms·

I have a small apartment and realized my WiFi router power levels are by default set to 100%. I dropped it to 25% with no meaningful reduction in bandwidth. It'

I have a small apartment and realized my WiFi router power levels are by default set to 100%. I dropped it to 25% with no meaningful reduction in bandwidth. It's a simple precaution and while I don't believe I am sensitive to RF fields maybe my neighbor's children are.

deleted 5y ago
[deleted]
WrtCdEvrydy 5y ago
The issue that the ISP doesn't want complaints so those routers are always set to auto-hop at maximum speed. Since most apartment complexes use the same company, the hops are always around the same time so you basically have these routers screaming at maximum speed and moving between channels.
- blobbers 5y ago
  What are you talking about? Your wifi router isn't jumping channels unless you have something fairly sophisticated (read auto channel assignment that recalibrates periodically when nobody is connected).
  - noselasd 5y ago
    Doesn't most consumer wifi routers do that by now by default ?
    - foxfluff 5y ago
      I don't know if it hops when nobody is connected but I certainly found mine to hop while I'm connected. It'd hop around until it finds a channel where wifi doesn't work, and then stays there. I had to force a channel..
    - justshowpost 5y ago
      Scanning for least congested freq is very common, but it only performed right before upping of AP iface and no else. So sweeping the band with AP is very impractical.
      - blobbers 5y ago
        some of the higher end routers have an extra radio specifically for scanning. Ie: see Cisco https://meraki.cisco.com/product/wi-fi/indoor-access-points/mr44/ https://meraki.cisco.com/product/wi-fi/indoor-access-points/... This thing will scan channels, as well as perform security operations.
  - hansel_der 5y ago
    enthusiast (eg. vanilla-openwrt) and enterprise gear won't, but soho and consumer routers totally do, because in a high density, non-cooperative environments (apartment) it has some potential to make it suck less and ppl like and pay for them "smarts".
    - blobbers 5y ago
      Right, but you can't frequency hop without disconnecting most clients. Generally speaking most modern clients are connecting on 5GHz anyways; it's just some generic things like wifi scales or legacy devices that might only be in the 2.4 spectrum.
BenjiWiebe 5y ago
Also, I thank you on behalf of your neighbors for reducing Wi-Fi interference. If only everyone would reduce power to the minimum needed to cover their living space, interference would be less and performance would be better.

deleted 5y ago

[deleted]

WrtCdEvrydy 5y ago

The issue that the ISP doesn't want complaints so those routers are always set to auto-hop at maximum speed. Since most apartment complexes use the same company, the hops are always around the same time so you basically have these routers screaming at maximum speed and moving between channels.

blobbers 5y ago
What are you talking about? Your wifi router isn't jumping channels unless you have something fairly sophisticated (read auto channel assignment that recalibrates periodically when nobody is connected).
- noselasd 5y ago
  Doesn't most consumer wifi routers do that by now by default ?
  - foxfluff 5y ago
    I don't know if it hops when nobody is connected but I certainly found mine to hop while I'm connected. It'd hop around until it finds a channel where wifi doesn't work, and then stays there. I had to force a channel..
  - justshowpost 5y ago
    Scanning for least congested freq is very common, but it only performed right before upping of AP iface and no else. So sweeping the band with AP is very impractical.
    - blobbers 5y ago
      some of the higher end routers have an extra radio specifically for scanning. Ie: see Cisco https://meraki.cisco.com/product/wi-fi/indoor-access-points/mr44/ https://meraki.cisco.com/product/wi-fi/indoor-access-points/... This thing will scan channels, as well as perform security operations.
- hansel_der 5y ago
  enthusiast (eg. vanilla-openwrt) and enterprise gear won't, but soho and consumer routers totally do, because in a high density, non-cooperative environments (apartment) it has some potential to make it suck less and ppl like and pay for them "smarts".
  - blobbers 5y ago
    Right, but you can't frequency hop without disconnecting most clients. Generally speaking most modern clients are connecting on 5GHz anyways; it's just some generic things like wifi scales or legacy devices that might only be in the 2.4 spectrum.

BenjiWiebe 5y ago

Also, I thank you on behalf of your neighbors for reducing Wi-Fi interference. If only everyone would reduce power to the minimum needed to cover their living space, interference would be less and performance would be better.