4 ms·

I find the ESP32 much easier to develop for, you don't need to install any toolchains, just plug in and drop code into the virtual USB drive that shows up! I wi

by dheera 5y ago

I find the ESP32 much easier to develop for, you don't need to install any toolchains, just plug in and drop code into the virtual USB drive that shows up! I wish all microcontrollers were like that these days.

BoorishBears 5y ago
That sounds like a very specific bootloader that you're using ESP-IDF is still very nice though, and being CMake based makes it easy to integrate outside code It supports serial based uploads, which are still pretty nice with the bundled serial monitor (one key combo to build, upload, and restart) and OTA uploads
- dheera 5y ago
  Oh sure, but it's still way better than the last time I had to deal with an STM32 and install about 5 different things, modify a "boards.txt" file (which there were 3 copies of on my system in different places and I had no idea which was the real one) and then hit the program button with one hand with a mouse in the air while carefully timing a short of a reset trace on a PCB with the other with my elbow holding down the PCB. STM32s really suck. Never had to do that with an ESP32, at least someone made a nice bootloader for it.
fcsp 5y ago
How do you handle SSL? I found this very cumbersome in my experiments with esp32
- stavros 5y ago
  It depends on whether you want to connect to random hosts or ones that you know beforehand. The latter is very easy, I just hardcode the certificate fingerprint. The former/dealing with CAs is harder, I've never done it.
- SavantIdiot 5y ago
  I never coded on Espressif, but in other SDKs (e.g., mosquitto, mbedtls) typically this is done when you open the connection at the application layer (HTTPS, MQTTS). You pass in the cert bytes either as binary or PEM text as a char[]. Use a CA root cert(s) from your OS/browser. EDIT: grammar and typos.
- konschubert 5y ago
  The high-level client in esp-idf handles ssl out of the box and comes with a list of pre-installed root cas. The question, of course, is: What if these CAs expire?

by dheera 5y ago

BoorishBears 5y ago

That sounds like a very specific bootloader that you're using ESP-IDF is still very nice though, and being CMake based makes it easy to integrate outside code It supports serial based uploads, which are still pretty nice with the bundled serial monitor (one key combo to build, upload, and restart) and OTA uploads

dheera 5y ago
Oh sure, but it's still way better than the last time I had to deal with an STM32 and install about 5 different things, modify a "boards.txt" file (which there were 3 copies of on my system in different places and I had no idea which was the real one) and then hit the program button with one hand with a mouse in the air while carefully timing a short of a reset trace on a PCB with the other with my elbow holding down the PCB. STM32s really suck. Never had to do that with an ESP32, at least someone made a nice bootloader for it.

fcsp 5y ago

How do you handle SSL? I found this very cumbersome in my experiments with esp32

stavros 5y ago
It depends on whether you want to connect to random hosts or ones that you know beforehand. The latter is very easy, I just hardcode the certificate fingerprint. The former/dealing with CAs is harder, I've never done it.
SavantIdiot 5y ago
I never coded on Espressif, but in other SDKs (e.g., mosquitto, mbedtls) typically this is done when you open the connection at the application layer (HTTPS, MQTTS). You pass in the cert bytes either as binary or PEM text as a char[]. Use a CA root cert(s) from your OS/browser. EDIT: grammar and typos.
konschubert 5y ago
The high-level client in esp-idf handles ssl out of the box and comes with a list of pre-installed root cas. The question, of course, is: What if these CAs expire?