4 ms·
Apple says “jelly scroll” issue on iPad mini 6 is normal behavior
- layer8 5y agoFor those interested: The "jelly scroll" effect is caused by the normal sequential-scan refresh of LCD and OLED displays, and is therefore visible to some extent on all such displays, either in vertical or horizontal orientation. Here [0] is a page that can be used to reproduce it. The issue with the iPad mini 6 is that its display refreshes along ita short edge instead of the long edge, which causes the effect to be visible in portrait orientation when scrolling vertically, a common use-case. It is exacerbated by the fact that the short edge on the mini 6 is even shorter than before, due to the changed aspect ratio. (The mini 6 has the widest aspect ratio of all iPads.) This increases the perceived amplitude of the effect. Most people wouldn't have a problem if the display would refresh along the long edge instead. However, this can only be changed in hardware, using different display components. [0] https://www.testufo.com/scanskew https://www.testufo.com/scanskew
- giuliomagnifico 5y agoIt’s normal but I think could be avoided simply by rotating upside down the iPad mini, according to the same problem in One Plus 5 https://www.ubergizmo.com/2017/06/upside-down-display-oneplus-5-jelly/ https://www.ubergizmo.com/2017/06/upside-down-display-oneplu... Yes, you still have a tilted iPad. I have no idea why Apple has placed the display refresh hardware on that side. Probably due to a internal components layout.
- layer8 5y agoIt’s the same upside-down on the mini 6, the skew just goes in the other direction then.